What is the purpose of piggyback shocks?
Primarily the aim of the piggyback design is to increase performance, the thinking is thus: By keeping the IFP and damper charge (usually nitrogen) away from the main body of the shock, heat build up over a long descent isn’t as much of an issue.
What size are stock Sportster shocks?
11″ to 13 1/2″
Notes: Depending on model, your stock shock length is 11″ to 13 1/2″ Shock lengths are measured fully extended, eyelet to eyelet on centers.
Can you adjust stock Sportster shocks?
Adjust the front and rear shocks by hand-turning the pre-load setting ring at the base of the shock (just above the bottom bolt hole and below the spanner adjustment area) forward to stiffen the shock or toward the rear of the bike to soften it.
Are adjustable shocks worth it?
Double-Adjustable Shocks are an Investment Worth Making Ultimately you’ll need to get out on the track and make adjustments incrementally for the best result, which double-adjustable shocks work perfectly for. If you want faster lap times, you’ll need to control all variables, including your shocks.
How long do Sportster shocks last?
Harley motorcycle shocks are expected to last at least 30,000 miles. By 40,000 miles, most shocks will need to be rebuilt at the very least, if not replaced. Keep your Harley at peak performance by proactively inspecting your shocks every 30,000 miles.
How can I make my Sportster ride better?
If you have any back issues, a seat with a backrest can be a lifesaver. AirHawk seat pads are a nice addition for really long rides, no matter what seat you might have. The biggest issue with the Sportster when it comes to riding comfort is the short wheelbase. It tends to pitch the bike around a lot.
What are reservoir shocks good for?
They’re designed with an external reservoir that increases fluid capacity. This increase in capacity helps lower fluid temperature, thus offering the ability to blast over rough terrain without experiencing shock fade due to overheating.
Do remote reservoir shocks ride better?
Most people think the only benefit of remote reservoir shocks is their extra cooling capacity. But, another significant advantage is that a remote reservoir shock can offer more suspension travel than a non-reservoir shock of the same size.
Do I need double adjustable shocks?
Double-adjustable shocks allow you to dial in your suspension and have the most control over the way your car handles. Ultimately you’ll need to get out on the track and make adjustments incrementally for the best result, which double-adjustable shocks work perfectly for.
What is the difference between single and double adjustable shocks?
Single Adjustable shocks mean that when you adjust the shock looser or stiffer you are adjusting both the rebound and the compression together, the shock will be loose or stiff both ways. Double Adjustable shocks mean that you are adjusting the rebound and the compression independently.
What kind of shocks does a Harley Sportster have?
One of the more popular upgrades for the Harley Sportster is a set of shocks. The rear suspension on Sporty models use a traditional twin shock system with pre-load adjustment and little else.
Should I get a piggyback shock for my Öhlins Sportster?
While Öhlins is not the only manufacturer to offer a piggyback-style shock, anyone who is looking to do any type of sport oriented riding on their Sportster should look long and hard at these trick units.
Should I upgrade the shocks on my Sportster?
The stock shocks were designed to fit a variety of riding styles as well as the average rider size, but are not optimized for each rider’s needs. A simple shock upgrade can allow individuals to fine tune the bike to their tastes and enhance the overall riding experience. This article applies to Harley-Davidson Sportster.
What is the height of the rear shock absorbers on a Sportster?
The height of the shock absorbers is 10.5 inches. The set includes fasteners and a special key, with which you can conveniently install and adjust the springs. By installing this set on the bike, you significantly press the back of the motorcycle onto the road. As a result you get a small Sportster rear shock length within 10.5 inches.