How do I fix error code F21 on Maytag?
Possible Causes and Action:
- Disconnect power to the washer.
- Turn off both hot and cold water faucets.
- Make sure the drain hose is free from kinks and obstructions.
- Clean the drain pump filter.
- Plugin the washer.
- Try to restart the machine.
What does it mean when my Maytag washer says F21?
In this particular case, error code F21 indicates an issue with your Maytag washing machine’s drain valve. When it takes eight or more minutes for a Maytag washing machine to drain, the device will tell its pipes to close, and you’ll be forced to troubleshoot.
How do I fix my F21 washer?
If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.
How do I reset my Maytag error code?
How do I clear the error code on my Maytag washer? To clear the error code on your washing machine, you have to press the pause/ cancel button twice and the power button once. If still, code is displayed, unplug the machine for a minute.
Why won’t my Maytag washer drain?
An obstructed drain hose is one of the most common reasons a Maytag washer won’t drain. Both kinks and blockages can obstruct the hose, preventing proper draining. A kinked hose can be gently straightened to restore function.
How do I hard reset my Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.
How do I get my Maytag washer to drain and spin?
A top load Maytag washer not draining may have a defective lid switch assembly. On top-loading washers, draining and spinning will only occur if the lid is properly closed and activates the switch. Try depressing the lid switch with your finger to see if the machine drains and spins.
How much does it cost to fix a drain pump on a washing machine?
Washing Machine Pump Repair Cost On average, expect to spend $300 to $400 for a pump replacement job. Washing machine pump repairs are usually required when you note active leaks or a tub that doesn’t drain. If the tub does not move, but the agitator does, this indicates the pump is starting to experience issues.