How do I connect my foscam to my laptop?

Posted on by David Darling

How do I connect my foscam to my laptop?

How to connect directly to Foscam camera using a computer?

  1. Step 1: Document the configuration of the local network.
  2. Step 2: Assign a Static IP Address to the computer.
  3. Step 3: Disconnect the computer from any WIFI network and leave it connected to a cable only.

How do I setup my foscam wireless IP camera?

Option 1: setup via the Foscam app

  1. Connect your smartphone or tablet to your router’s network.
  2. Download the Foscam app in the App Store or via Google Play.
  3. Start the application.
  4. Create an account via the app.
  5. Scan the QR code on the camera. The app will than find the camera’s information.
  6. Follow the steps in the app.

How do I find my foscam on my network?

To find out the IP address of the Foscam camera follow the steps below.

  1. Connect the camera via an Ethernet cable to a LAN port on the router.
  2. Power on the Foscam camera.
  3. Verify the computer is connected to the same router.
  4. Standby until the camera completes the self-test.

How do I connect my IP camera to my Mac?

  1. Step 1 – Connect the camera. Most routers, including AirPort, will have DHCP turned on.
  2. Step 2 – Changing the IP address of your Mac.
  3. Step 3 – Connect to your Network Camera. You should now be able to connect to your Network Camera using the Mac.

How do I access my security camera on my Mac?

View video

  1. In the Home app on your Mac, click the camera tile on the Home screen. Live video plays automatically.
  2. Click a clip to play it, or scrub through the timeline at the bottom of the screen to browse recorded clips.
  3. To switch back to live video, click Live.

Why won’t my foscam camera connect?

Foscam WIFI cameras have two network adapters contained within them. A Ethernet adapter with a MAC address and a WIFI adapter with a different MAC address. If the router has wireless MAC filtering turned on and the camera is not on the list of approved devices the router will not allow that wireless connection.

What is IP address for Foscam camera?

IP address: 192.168. 1.100 (the last numbers of the address can be changed between a range of 2-253) Subnet mask: 255.255. 255.0.

What is the IP address for Foscam?

1)Go to Advanced Settings–>Port Forwarding page to add a Custom Service: 2)Then please input the camera’s http port (1818) to the “External Port Range” box and “Internal Port Range” box, then input the camera’s IP address (192.168. 1.4) to the “Internal IP address”.

How do I install camera on Mac?

How to Enable the Camera on Mac

  1. In the Finder, open the Applications folder.
  2. Select an app that uses the iSight camera.
  3. As soon as you open PhotoBooth, FaceTime, or another iSight compatible app, the iSight camera activates.

How do I connect my camera to my laptop via Wi-Fi?

How to wirelessly connect the camera to the computer.

  1. Turn the computer ON and the Wireless Device ON.
  2. Turn the camera ON.
  3. Press the Menu button.
  4. Go to Network settings.
  5. Select Access point settings and press the center button on the control wheel.

How do I connect my camera to my Mac?

Connect an external camera

  1. Connect the camera’s cable to a port on your Mac. See About the video ports on Mac. If the camera has a connector that doesn’t match the port you want to connect it to, you may be able to use it with an adapter.
  2. Wait 10 to 15 seconds for your Mac to recognize the camera.

How do I reset the Foscam fi8904w?

Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 3 WWW.FOSCAM.COM FI8904W/ FI8905W User Manual 1.3.2 Back View Figure 1.2 LAN: RJ-45/10-100 Base T Power: DC 5V/2A Power supply RESET BUTTON: Press and hold down the RESET BUTTON for 15 seconds.

What to do if I have problem with Foscam IP camera?

If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems. If our reseller cannot provide service, pls contact our service department:

What are the specifications of the fi8904w/fi8905w camera?

FI8904W/ FI8905W User Manual Shenzhen Foscam Intelligent Technology Co., Ltd Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 43 4.3 Specifications ITEMS FI8904W/FI8905W Image Sensor High Definition Color CMOS Sensor Display Resolution 640 x 480 Pixels(300k Pixels) Lens(04) f: 3.6mm or f: 6mm Lens(05) f: 6mm, or f: 8mm or f:12mm ，F:1.2

How to use foscam31 with ipcam?

“foscam 13”(see Figure 3.20a,it is contained in the MSN Friends List) login MSN, double click the icon of “ foscam31 “(it is the MSN ID you applied fo r camera ,Figure3.20a) , which will start a chat session with IPCAM (Figure 3.21). Figure 3.21