How do I setup my Motorola SURFboard SB5101 cable modem?
Motorola’s SB5101 SURFboard cable modem is capable of 30 Mbps performance when connected to compatible networks.
- Plug an Ethernet cable into the Ethernet jack of a wireless router.
- Grasp the other end of the Ethernet cable.
- Plug the power adapter of the router into a wall socket or power strip.
How do I activate my cable modem?
Connect the coaxial cable from the cable outlet on the wall to the back of your modem. Plug the power cord into the power port on the back of your modem and the other end into an electrical outlet that is not connected to a switch. Result: The modem lights start to flash and light up.
Why won’t my Motorola modem connect to the Internet?
If you are having troubles connecting to the internet, first try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. When the modem lights come back on restart your computer or if your modem is connected to a router unplug your router for 30 seconds and plug it back in again.
How do I setup my Motorola Surfboard SBG6580?
Install the SBG6580. Connect the coaxial cable to a cable wall outlet (if not connected) and the Cable connector on the rear of the SBG6580. Hand-tighten the connectors to avoid damaging them. Connect the Ethernet cable to the Ethernet port on the computer and to the Ethernet port on the rear of the SBG6580.
How do I log into my surfboard modem router?
Type 192.168. 100.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password.
How do I setup my Motorola SBG6580 wireless router?
Power on the computer and login. For Wi-Fi client devices connect to the SBG6580-XXXX SSID (Service Set Identification) located on the bottom white sticker of the device. When prompted enter the Wi-Fi Security Key to connect to the Internet. Launch a web browser, such as Internet Explorer, Firefox, or Safari.
How do I setup my own modem?
Plug your modem’s power cord into an electrical outlet. Enter your modem’s 12-digit MAC number. Once your modem is connected to the coax cable in an active outlet and the power cord plugged into an electrical outlet, you’ll be prompted to Check Your Connection.
Does new modem need to be activated?
At this point, most internet providers will require you to activate the new device using the information you collected in step 1. Some may require you to call them, others to visit an online activation page….4. Activate your new modem.
| Provider | How to Activate Modem |
|---|---|
| Other | Search for: YOURINTERNETPROVIDER modem activation |
Why is my modem connected but no internet?
It could be due to broken cables, service disruptions, or just about anything else that’s not within your control. That said, it’s important to know if the problem lies with your Internet provider. For this, check if the “Internet” light on the modem is working. Ideally, the power and DSL lights should be turned on.
What color should the lights be on an Arris modem?
Understanding the status lights and buttons on your ARRIS NVG448 gateway
| Colour | Status |
|---|---|
| Off | The gateway is off or not receiving power |
| Solid red | The gateway is not booting properly (error) |
| Flashing green | The gateway just connected to power |
| Solid green | The gateway is on |
How do I reset my Motorola SURFboard SBG6580?
Factory Reset Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds. The indicators are that all LEDs turn off.
What do the lights on Motorola modem mean?
When the light is flashing, the modem is scanning for the send channel connection. A solid light indicates the channel connection is acquired. Online. When the light is flashing, the modem is scanning for the network configuration server connection. A solid light indicates the connection is acquired.
What is the Motorola router default username and password?
Default is Username: admin, Password: motorola.
How do I find the IP address of my cable modem?
How to find the IP address of your router using Windows
- Right-click the Windows icon in the bottom-left of your screen, and select “Command Prompt.”
- In the Command Prompt window, type “IPCONFIG” and press Enter.
- Find the “Default Gateway” section. The number listed here is your router’s IP address.