How does Kodak carousel work?
The Kodak system offered three advantages over the straight-tray, horizontal-feed systems that were then common on the market. The Carousel tray held slides in place with a locking ring on its hub, preventing slides from accidentally spilling out of the tray if it was dropped.
Are Kodak carousels interchangeable?
The Ektagraphic accessories, including trays, lenses, and remotes/other controllers are 100% interchangeable with Carousels, and from what I’ve seen they are at worst the same price as comparable age Carousels if not somewhat less expensive since the name isn’t as well know.
How do you dispose of old 35mm slides?
The safest, simplest, and cheapest way of destroying the images is to drop the slide film into boiling water. The gelatine-bearing image layers will quickly melt, slide off the film base into a black gelatinous mass which you discard into normal household waste.
How does slide projector work?
A flat piece of heat absorbing glass is often placed between the condensing lens and the slide, to avoid damaging the slide. This glass absorbs infrared. Light passes through the transparent slide and lens, and the resulting image is enlarged and projected onto a screen. So the audience can view its reflection.
How do you remove a slide from a carousel?
In the list of slides, highlight the slide you want to remove, and press “Delete” on your keyboard. (Don’t worry- you are not deleting the actual slide.
Is it OK to throw away old pictures?
Generally, it’s not advisable to throw away negatives because you can use them to bring your photo back to life if the picture gets lost or damaged. But if you have no other use for the film, you can try sending them to a local company for recycling.
What does a condenser do in a projector?
The aim of the condenser lens in a projector system is to align the light rays into a straight path. This allows the maximum amount of light possible to reach the projector screen. A high quality condenser lens will allow the aperture of the projector lens to be reduced in size.
How many lenses are used in slide projector?
3) One or two condensing lenses. The projector is designed so that as much light as possible passes through the slide. The condensing lens (or lenses) catches the light from the light bulb and reflector and bends it so that it passes through the slide.
How do you fix a jammed slide projector?
How to Fix a Broken Slide Projector
- Shut the slide projector off and let it cool down for a few minutes.
- Remove the slide tray by loosening a latch or placing a coin in the middle of the tray & turning it.
- Turn the tray upside down.
- Locate the jammed slide and carefully remove it.
- Place the tray back into the projector.
How do you unjam a Kodak Carousel?
To remove a defective slide or foreign object stuck in the projector gate, you need to remove the tray. Slide the tray release latch in the direction of the arrow, and • with your other hand, lift off the back of the tray. With the lock ring firmly in place, turn the 140-slide tray upside down.
When did Kodak stop making slide projectors?
November 18, 2004
At a low-key ceremony on November 18, 2004, Kodak celebrated the last production of its slide projector. The company will continue to make replacement parts for another seven years, as required by US law.
Are old photo slides worth anything?
Notice to new and old sellers: slides very very very rarely sell for more than 5 or 6 cents each – so starting them out at 10 or 25 cents each is a waste of space and your time. Mom’s old slide carousel of travel slides will not sell for $100.00 even with free shipping.