Which way does bobbin go into bobbin case?
Place the bobbin case in the palm of your hand with the front facing down and the open end facing up. The thread direction of the new bobbin should be winding clockwise as you drop the bobbin into the case.
How do you fix a loose bobbin case?
If the bobbin case doesn’t budge, your bobbin tension is too tight. To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Which way should a bobbin go?
Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise.
How do you remove the bobbin from a bobbin case Janome?
If you look at the front of the bobbin case, you should see a little flap thing, like a hinge, lift that and it should allow you to pull the case out, then when you release it, the bobbin should drop right out.
What are the common problems with Janome sewing machines?
The bobbin and the bobbin case should be dust-free for smooth working. Even a slight amount of dust present in the bobbin or bobbin case would affect the performance of your Janome machine. 6. Needle Breaking The needle of your Janome machine might break if you don’t carry out proper threading in the bobbin.
How do I clean the bobbin case?
There should be no dust or any mushy particles present in the bobbin and bobbin case. You can take out the bobbin case and remove its parts, such as tension spring, tension screw, and bobbin thread.
Why does my bobbin case keep popping out?
The bobbin case might keep popping out if you don’t insert your bobbin correctly in its place after you take it out for cleaning or servicing. It may also happen when you are using the machine after a while. Thus, before starting the sewing process, you should check the placement of the bobbin.