What is a bearing puller used for?
A bearing puller is a tool which is used to remove components such as bearings, gears and pulleys from a shaft or a recess. The puller securely grips the component with specially designed jaws before driving it off the shaft. Pullers are used in every industry for safely and effectively dismounting bearings.
What are the types of bearing puller?
Types of bearing pullers include bearing splitter plates, two and three arm bearing pullers and internal bearing pullers.
What is a puller?
: one that pulls in specifically : a man who stands in front of a store or place of entertainment and tries sometimes forcibly to get passersby to enter.
What is a gear and bearing puller?
The best way to remove worn out gears or bearings from a shaft is to pull them off using a gear puller. These have arms that hook behind the gear or bearing and a centre screw.
What is the meaning of puller?
How do you buy a bearing puller?
Lovely Jet 75mm Carbon Steel Round Cap Armature Bearing Pull Breeze 5 inch Metallic Reversible Bearing Puller with 2 Jaw ……Bearing Pullers – Price Range.
| Bearing Pullers | Min Price | Max Price |
|---|---|---|
| Pahal Bearing Pullers | ₹229 | ₹729 |
| Arnav Bearing Pullers | ₹180 | ₹1366 |
| Lovely Bearing Pullers | ₹237 | ₹2520 |
What is a gear puller?
Gear pullers remove automotive gears and bearings. Jaw pullers have two or three arms with hooks that grip parts to secure and pull them off of a spindle. Pullers and separators help remove heavy parts or tightly fitted components in autobody shops. Gear pullers remove automotive gears and bearings.
What is a mechanical puller?
Mechanical pullers work by rotating a crossbar which moves the centre bolt/force screw towards the shaft. Hydraulic pullers include an integral hydraulic cylinder that is powered by a pump to apply the required force.
What is a puller tool?
A puller is a tool used to remove parts such as bearings, pulleys or gears from a shaft. They have legs, typically two or three which circle around the back or inside of a part and they also have a forcing screw which centres up against the end of a shaft.
How does a bearing puller work?
A typical bearing puller has a forcing screw that is positioned on the end of the shaft and legs that circle around the back of the bearing. These are referred to as external bearing pullers, but internal (i.e. blind-bearing) pullers are available types too.
What are the parts of a puller?
Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
How do you use an O’Reilly bearing puller?
As you tighten the center of the bearing puller, the puller arms move toward you until the part comes out. At O’Reilly Auto Parts, we have a selection of bearing pullers to help you with your repairs. Also see our bearing race and seal driver tools to complete the job.
What are the different types of bearing pullers?
This is roughly divided into four categories or four types of pullers: If the part to be removed is seated on a shaft and is freely accessible from the outside, you can use an external puller. This type of puller is the most commonly used. If the part to be removed is in a recess and not on a shaft, you need an internal bearing puller .