Why is my Paslode finish nailer not firing?
Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The wrong type of Paslode nails are being used.
What should you do first before clearing a jammed nailer?
For safety, first disconnect the tool from the air supply, retract the feeder mechanism, and remove any excess fasteners from the magazine. From there, clearing the jam depends on what type of nailer you have. Some tools require the magazine to be detached or opened, or require a special tool to access the nosepiece.
Why does my finish nailer keep jamming?
What Caused the Jam: Lack of Adequate Oil: The air cylinder in the nose needs plenty of oil to function properly. Too little oil, and the nails will be slow to feed, causing a jam. Pro Tip: For coil nailers, use 10-15 drops of oil before nailing.
Can you use brake cleaner on Paslode nail gun?
the paslode cleaner is just the same as brake part cleaner that you would use on your car. you can get it cheaper than paslode cleaner at your local motor factors. spray it all over to remove old oil and dust ,leave for 5 mins and re-oil. you are best to use the proper paslode oil,it lasts longer and works better.
Can you use WD40 on Paslode nail gun?
wd40 just clogs everything up. the paslode cleaner is just the same as brake part cleaner that you would use on your car.
Can I use wd40 on my Paslode nail gun?
wd40 just clogs everything up. the paslode cleaner is just the same as brake part cleaner that you would use on your car. you can get it cheaper than paslode cleaner at your local motor factors. spray it all over to remove old oil and dust ,leave for 5 mins and re-oil.
How do I know if my Paslode Nailer is jammed?
Here’s how… If a nail gets jammed in your Paslode nailer, it won’t be able to fire any nails and it will make a strange puffing noise every time you try to. The driver blade will also likely be sticking out at the nose. If you’re experiencing problems but your nail gun is still firing, then it likely isn’t a nail jam.
What are the most common problems with Paslode nail guns?
For the most part, most of the issues with Paslode nail guns are due to the following: Most Paslode nail guns should be cleaned and lubricated after a given nunber of shots (refer to your manual). Do it more often if you often use it in a dirtier environment or you’re frequently using it for heavy work.
Why does my Paslode Nailer fire two nails simultaneously?
Mostly, your Paslode nailer will fire two nails simultaneously either because the chamber the driver follows has issues or you’re shooting the wrong nail size. The other thing that you can suspect in cases of double firing (Double Kiss) is some parts being a bit loose.
Why is my Paslode framing Nailer blinking red?
Paslode framing nailer blinking red light / paslode im360ci gas light flashing red If the light flashes red, the most common solution is to recharge the battery- the battery may have entered standby mode because you’ve not used the tool for a lengthy period of time.