What does F 01 mean on a Hotpoint washing machine?
Electronic circuit board fault Issue
F01 — Electronic circuit board fault. Issue: Washing Machines is not operating – some or all functions are not selectable. Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the machine again.
What does error F 05 on a Hotpoint washer?
Fault: Hotpoint washing machine showing fault code: F05 = Waste pipe blockage or pump issue. Initial repair: Pull the grey ribbed pipe off of the spigot under the sink and place it in a bowl or bucket. Put the machine onto a spin/drain cycle and check to see if the water drains into the bucket or bowl.
What is code F19 on a Hotpoint washing machine?
F19 — Fan motor or heating fault (washer dryers only) Issue: Washer Dryers is not drying / stops during drying cycle.
What does e03 mean on a Hotpoint washing machine?
Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.
How do I fix F5 error on washing machine?
Try resetting the washer by unplugging it for 10 minutes. This may clear the code and end the problem, especially if you got all the obstructions out of the lid lock mechanism. You can also press and hold the end of cycle button for 20 seconds and that should reset the washer and clear the codes.
How do I fix E03 error?
The machine is unable to drain the water away. Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.
How do I fix eo3 error?
How to Diagnose and Fix a Hoover E03 Error Code
- Remove the drain filter and rinse it to clean it.
- Check the drain pump and remove any blockages.
- Check that the drain hose is clear of obstructions.
- Check the wiring to the drain pump.
- Check there is no blockage in the drain pipe.
How do I fix e03 error?
What does F5 mean on my washing machine?
Possible Solutions The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area.
What is F5 error code?
An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.
Why is my washing machine flashing F5?
Possible Solutions The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.