What is the difference between flush mount and hugger ceiling fans?
Flush mounts anchor the fan directly against the ceiling. Most standard fans can be installed as a flush mount however, many manufacturers sell “hugger” or “low profile” ceiling fans that are specifically designed for this purpose.
What is a hugger mount ceiling fan?
Hugger ceiling fans are defined as ceiling fans that do not include a downrod when mounted to the ceiling, and they are often interchangeably referred to as flush-mount ceiling fans. For this reason they are a great choice for low ceilings or small rooms.
How far down does a flush mount ceiling fan hang?
Standard mount ceiling fans typically have 12 to 14 inches of space between the ceiling and fan blades. Flush mount fans, on the other hand, only need between 6 and 10 inches between the ceiling and the fan blades.
Can you put a ceiling fan in a dropped ceiling?
With the Westinghouse Saf-T-Grid, contractors or do-it-yourselfers can safely install a lightweight ceiling fan, lighting fixture, or chandelier from a suspended ceiling.
Are down rods necessary?
A downrod has two primary and important functions, one is to stabilise the fan and prevent it from wobbling when in motion, and the second is to aid the proper flow of air while maintaining a safe distance between the blades of the fan and the ceiling, as well as the blades of the fan and the floor.
What is a flush mount ceiling fan?
A flush mount fan is a fan that’s anchored directly to the ceiling so that the base is “flush” against the ceiling.
How far down from the ceiling should a ceiling fan be?
10 to 12 inches
Ceiling fan should be 10 to 12 inches below the ceiling. No fan blade should be closer than 8 inches from the ceiling. No fan blade should be closer than 18 inches from the walls.
Which is better flush mount or downrod?
Do flush mount ceiling fans work as well as downrod? From a performance perspective, downrod ceiling fans are superior in that they allow for much better air circulation due to the amount of airflow above the unit. However, if you have a smaller room with low ceilings then you may not require as much airflow.
What is the lowest profile ceiling fan available?
11 Best Low Profile Ceiling Fans Available Right Now
- Best Remote Controlled:Hunter 52139 42″ Haskell Indoor Low Profile Ceiling Fan.
- Best Multi-Speed Fan:Casa Vieja Ancestry Hugger Low Profile Ceiling Fan.
- Best Ultra-Powerful Airflow:Hunter Dempsey Indoor Low Profile Ceiling Fan.
Is an 8 ft ceiling too low for a ceiling fan?
In order for a fan to be considered to be OK to use on an 8 foot ceiling, the bottom of the blades of the fan must be 7 feet off the floor when the fan is installed. The fan bodies themselves may extend slightly below the blades but will not affect the fan’s ability to be mounted on an 8 foot ceiling.
Can you put a ceiling fan in a basement?
Unfortunately, basements aren’t always built for the best airflow and ventilation. That’s where ceiling fans come in handy. Installing ceiling fans in your basement will improve airflow and increase circulation.
Can you hang a fan without a downrod?
Most ceiling fans are designed to hang from standard ceiling heights of 8′ to 9.5′ tall, without the need to add a longer downrod. If your ceiling is higher than this you will need to use a longer downrod than what the ceiling fan will probably be packaged with.
Does Downrod length matter?
The 1st rule is the most important one. Every ceiling fan downrod should be long enough to suspend a fan at least 7 feet from the ground and at most 9 feet above the ground. You should shoot for an average of 8 feet above the ground positioning.
What happens if ceiling fan is too close to wall?
Quite simply, the closer the blades are to the ceiling, floor, or walls, the less air volume the fan has access to, and the more difficult it will be to move the air.
How high should a ceiling fan be off the floor?
You will want your new ceiling fan to hang between 8′ and 9′ above the floor, regardless of ceiling height. Most fan bodies (including mounting hardware) are 8 to 12 inches. So, whatever your ceiling height is in feet, buy a downrod that will put the top base of the fan at 10 feet.
How far should a ceiling fan be from the ceiling?
Ceiling fan should be 10 to 12 inches below the ceiling. No fan blade should be closer than 8 inches from the ceiling. No fan blade should be closer than 18 inches from the walls.
How to install a ceiling fan?
2. Install the Ceiling Bracket 3. Wire the Ceiling Fan 4. Finish Installing the Canopy or Motor Housing 5. Install the Blades 6. Install the Lighting 7. Use the Remote Controls Click to Copy Embed Code! How to install a ceiling fan video by Hunter Fan.
Is there a ceiling fan installation guide from Hunter Fan?
The following ceiling fan installation guide from Hunter Fan should help you navigate the process of how to install a ceiling fan with step-by-step instructions for removing an existing fixture, ensuring proper ceiling fan wiring, and more. When referring to our ceiling fan installation guide, keep the following in mind:
How to install the motor housing for a low profile ceiling fan?
To install the motor housing for a low profile ceiling fan: 1 Tuck the wires and wire nuts into the junction box. 2 Raise the motor housing up until it’s correctly positioned over the motor and ceiling brackets. 3 Rotate the motor housing until the screw holes are aligned with the holes on the bracket. The indentation inside the… More