How do I Reset my Cisco router IP address?

Posted on by David Darling

How do I Reset my Cisco router IP address?

Open a paperclip and insert the end of it into the small recessed reset button. Hold for 10 seconds and you see should see the lights on the device light up. It will take at least a few minutes to boot back up. Your IP address will revert to 192.168.

What does a Reset do to a router?

Reset Your Router to Factory Defaults

  • Router reset will wipe out all of your customized settings.
  • Router username and password will be reset to factory default values as shown on the router label.
  • Personalized Wi-Fi settings will be deleted, including the Wi-Fi name and password you created.

What is the command to Reset a Cisco switch?

Resetting the Cisco IP switch to factory defaults

  1. Reset the switch to factory defaults: Erase the existing configuration: write erase. Reload the switch software: reload.
  2. Save the configuration: IP_switch-A-1# copy running-config startup-config.
  3. Reboot the switch and wait for the switch to reload: IP_switch-A-1# reload.

How do I completely Reset my router?

How to Reset a Router

  1. Keep your router plugged in.
  2. Find your router’s reset button. This will be on the back or the bottom of your router.
  3. Use a paperclip to hold down the reset button for 30 seconds.
  4. Release the button.
  5. Wait for the router to power back on.

How do I Reset my cisco 4200 router?

Find the Reset button on the router. Press and hold the Reset button while you power on the router. Release the Reset button after 10 seconds. Wait 5 to 10 minutes for the router to finish booting.

How do I Reset my cisco switch to factory settings?

Hold the “mode” button on the front of the switch for 10 seconds. The lights will blink then go solid – the switch completely wipes all configuration and then reboots.

Do routers need to be reset?

Know when to reboot your router so you can maintain a healthy, speedy internet connection. A good rule of thumb is to reboot your router or wireless gateway once a month to clear out its memory and refresh your wired and wireless connections.

How do I reset my Cisco wireless router password?

Cisco 3848V change password

  1. Visit the Admin Console by visiting 192.168.
  2. Log in with the following information:
  3. Click Login.
  4. Click Wireless at the top of the page.
  5. Click the Wireless Security tab.
  6. Under 2.4GHz Wireless Security, type a new password for the network in the Pre-Shared Key field.

How do I access my Cisco router?

Cisco router login:

  1. Make sure you’re connected to your network.
  2. Open a browser, and go to 192.168. 15.1.
  3. Enter the username and password.
  4. Default login credentials.
  5. Next Up: Speed up your Wi-Fi connection.

How do I reset my router and get new IP?

Turn off your router for a minute and turn it back on. However, if you try multiple times you may get lucky and will obtain a new IP address from your ISP. If multiple tries doesn’t get you a new IP address, try leaving the router turned off overnight and restart in the morning.

Does Resetting router delete everything?

It’s important to note that when you reset your home router you will lose all of your current network settings, like the name of the Wi-Fi network, its password, etc. (So don’t do this just for fun!)

How do I Reset my cisco 4300 router?