How do I control Beoplay A9?
Beoplay A9 3rd Gen music controls
- Play music. To play, tap the back of the unit.
- Pause & Mute. To pause or mute playback (depending on connection) touch the back of the unit for 2 seconds.
- Volume control. Increase or decrease volume by sliding your hand across the back of the unit.
- Skip tracks.
How do I set up a B&O A9?
Use the Bang & Olufsen app to configure and connect your Beoplay A9 2nd Gen to your network.
- Open the Bang & Olufsen app. Tap on “Add a product”.
- Connect the power cable. Connect your Beoplay A9 2nd Gen to the mains supply.
- Wait for the indicator to turn orange.
- Complete setup.
How do I reset my A9 speakers?
Press and hold (power) on the bottom of the speaker for more than 10 seconds. The power indicator of the speaker flashes slowly in red and resetting starts. The power indicator of the speaker flashes in green and orange alternately when resetting is completed.
How do I reset my B&O A9?
A Standby button Short press to put A9 on standby. Long press to turn A9 off. B Reset/Mic button Short press both buttons A and B to enter WiFi setup mode.
Can I connect Beoplay A9 to TV?
Yes, you can connect your TV or sound system to the line-in socket on Beoplay A9 4th Gen to hear the sound from your TV/sound system. Note that if you connect your music system to a TV, there is a small sound delay and therefore sound and image are not completely synchronised.
Is B&O audio good?
In short, YES. Now an international design icon and recognised internationally, the Bang & Olufsen brand is renowned for its high-end quality speakers, headphones and sound accessories and is loved by athletes, musicians and creators galore.
How do I connect Beoplay to my laptop?
Enable pairing mode on your Beoplay A1 by pressing and holding the Bluetooth button for 2 seconds. The product indicator will start flashing blue, and your Beoplay A1 is ready to connect to your device. Start the Bluetooth search on your PC (for media/audio devices). Beoplay A1 should appear as an available connection.
How do I reset my Beoplay A9 WIFI?
Reset Beoplay A9 4th Gen
- Remove the socket panel cover.
- Press the reset button (B) for 10 seconds until you hear a sound and the product status indicator flashes red shortly.
- When the network indicator starts flashing white and then begins to flash orange, Beoplay A9 4th Gen is ready to be set up in a wireless network.
How do I reset my Beoplay A9 1st generation?
Reset Beoplay A9 1st Gen
- Remove the socket panel cover.
- Insert a pin (for example a straightened paper clip) into the ‘reset’ hole and keep it pressed in for 5-6 seconds.
- A sound is heard, and the status indicator turns red shortly.
How do I connect my Beoplay to WIFI?
Go to “Settings” -> “Wi-Fi” on your iOS device and select Beoplay M5 from “Set up new AirPlay speaker” at the bottom of the list of available networks. And tap “Done” When the “Set up complete” message appears.
Can’t connect to Beoplay A9?
If you cannot connect your Bluetooth device to an already paired music system, you must try the following: Make sure that Bluetooth is activated on your device and that you have selected Beoplay A9 3rd Gen in the Bluetooth device list on your device and the connection has been confirmed by your device.
How do I set up my BeoPlay A9 on a network?
BeoPlay A9 Setup NETWORK NETWORK UPDATE PRODUCT SOFTWARE STATUS SETTINGS Please select the wireless network you would like to connect to, then enter your password to set up your product. Product Name Network Name (SSID) Password APPLY CHANGES BeoPlay A9_xxxxxxxx Select network
How to mount the BeoPlay A9 1st gen legs?
Mount the Beoplay A9 1st Gen legs Screw the 3 legs in, they are labelled A and B to how where they should be placed (A is the middle one). Make sure that the legs are screwed in tight, afterwards you can place the speaker in the upright position. 2
How do I use BeoPlay A9 to distribute music to multiple rooms?
Distribute music to every room by linking your wireless speakers and create a multiroom experience. Beoplay A9 supports Chromecast™ built-in, AirPlay 2, Beolink Multiroom and Bluetooth. Beoplay A9 with the Google Assistant.
What is BeoPlay A9 white?
Beoplay A9 White comes with Oak legs and White cover. Stylish and sophisticated. Beoplay A9 in this special edition with bronze toned aluminium ring and smoked oak wood legs.