What are stubby wrenches good for?
You can tighten and loosen bolts easily — even rounded or stripped bolt heads can be tugged loose with a stubby. You might find yourself in a situation where a regular wrench can only perform a quarter of a turn around a bolt.
How long is a stubby wrench?
Sized for working on small equipment, these wrenches are 4 1/8″ long with a slim head and handle.
What are the names of some common wrenches?
Types of Wrenches
- Pipe wrench.
- Chain wrench.
- Socket wrench.
- Torque wrench.
- Ratcheting Wrench.
- Oil Filter Wrench.
- Combination wrench.
- Adjustable wrench.
What size wrenches do I need?
To calculate the wrench size needed, you must first measure your bolt. Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly.
What are the standard wrench sizes?
Wrench Sizes In Order Standard sizing in America are as follows: 5/8, 19/32, 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32, and 1/8. These are set out from the smallest wrench to the largest, and you will be able to buy these wrenches individually or in wretch sets.
What are the little wrenches called?
Crescent wrenches are also known as adjustable wrenches. These are widely popular because they are easier to use and you don’t need a separate one for every size bolt. You can find these stashed in nearly all types of garages because they’re so universally useful.
What’s the real name for a monkey wrench?
adjustable spanner
Also called, especially British, adjustable spanner. a wrench having an adjustable jaw permitting it to grasp nuts or the like of different sizes.
What is the most common wrench size?
The most commonly used and sold SAE sizes for wrenches and sockets are:
- 5/16″
- 3/8″
- 7/16″
- 1/2″
- 9/16″
- 5/8″
- 11/16″
- 3/4″
Can you use a crows foot with a torque wrench?
If you place the crowfoot wrench at an angle 90-degrees to the torque wrench handle, the amount of torque you’re applying doesn’t change. You can set the torque wrench to the fastener’s torque specification and continue to use the torque wrench normally.
Why is it called a crowfoot wrench?
Called a “crowfoot” wrench because of its shape, this wrench was used in steam train repair work and to reach and to hold nuts and boltheads in difficult-to-reach places.
What is stubby screwdriver?
A stubby screwdriver is a tool used to facilitate access to screws located in areas that cannot be reached easily by a regular screwdriver. Sometimes, screws exist in places that are not wide open and may have something blocking access to them from the opposite side.
What is the difference between metric and standard?
Depending on the context, “standard” often refers to U.S. fasteners. This typically means we’re talking about measuring units in inches, whereas metric is exactly that: measurements based on metric units, such as millimeters.
What is a spud wrench?
Spud wrenches have a tapered spike at the handle end that’s used to align bolt holes when installing automotive components, beams, girders, or pipe fittings. The opposite end comes with a wrench to rotate fasteners for installation or removal.