How accurate is Netatmo weather station?
The manufacturer states an accuracy level of ± 3% on humidity and ± 0.54°F in temperature – for example. It’s also important to note that the Netatmo weather station seems to only function with quality network equipment such as up-to-date routers.
How often does Netatmo weather station update?
5 minutes
Currently, the netatmo weather sensor information is updated infrequently (every 10 or 5 minutes). This is not feasible for frequently changing data or data which must be reacted quickly upon, e.g. wind gust strength or rain.
How do you use Netatmo weather station?
Procedure
- Open the Netatmo Weather application.
- Go to Settings > Install new products.
- Select « Add-ons for the Smart Home Weather Station ».
- Follow the instructions.
- Check that Bluetooth is activated on the mobile.
- Choose the module you want to add from the list.
How long do batteries last in Netatmo weather station?
one to two years
Apart from the first indoor module (base station), the Netatmo devices work with AA or AAA batteries, which should last for one to two years.
Is Netatmo good?
Netatmo’s temperature gauge is quite accurate, but unfortunately its forecasts aren’t the best, with an average variance of 4.8 degrees. However, sometimes Netatmo really nails it when other units whiff: It was the only unit in the roundup to accurately predict a freak warm day in the middle of the test period.
How high should I mount my weather station?
Ideally mounted at a height of 4 to 6 feet above the ground. Ideally located at a horizontal distance of 4 times the height of the nearest obstruction. Ensure the gauge is mounted level to the ground, away from any horizontal surface that can introduce rain-splashing or surrounding snow buildup.
How do I update Netatmo weather station firmware?
Product interactions The internal software (firmware) on Netatmo products is updated automatically. The products are therefore equipped with the latest features and optimisations without requiring any intervention on your part.
Where do you put the wind gauge on a Netatmo?
It is recommended to place it about 1 m / 4 ft. above the top of your roof. The Wind Gauge should be placed horizontally and the arrow (there’s one at on the top and one in the bottom) must be pointing to the North. You can use your smartphone’s compass app to check that when you install your Wind Gauge at home.
Where does a rain gauge go in a Netatmo?
Location. The Smart Rain Gauge should be placed horizontally, if possible 50 to 150 cm above the ground, and at a distance equal to the height of the surrounding obstacles (by default 3m).
How does Netatmo measure air quality?
CO2 measurement As CO2 level rises, so does the concentration of unhealthy components of indoor air. CO2 level is therefore a good air quality indicator. The CO2 level is measured by the station’s indoor module.
Where is Netatmo made?
French
Netatmo is a French company which manufactures smart home devices….Netatmo.
| Type | S.A. |
|---|---|
| Founders | Fred Potter Jean-Pierre Dumolard |
| Headquarters | 93 rue Nationale, Boulogne-Billancourt , France |
Where should I mount my outdoor temperature sensor?
LOCATION OF YOUR OUTDOOR TEMPERATURE SENSOR IS IMPORTANT.
- Mount the sensor vertically at least 6 feet off the ground.
- Provide good airflow around the sensor.
- Direct sunlight can inflate the temperature reading, so a north-side, shaded location is best.
- If you have a solar panel on the sensor it will need to be charged.
How do you calibrate a Netatmo wind gauge?
To balance the wind speed measured by the Anemometer, you can enter the height at which it was installed in the Netatmo Weather App:
- Go to Settings > Manage my Home.
- Select the room where the Anemometer is located.
- Click on the module.
- In Configurations select Wind.
- Enter the height in the corresponding field.
How does Netatmo measure CO2?
Principle. The main module of the Smart Home Weather Station and the Additional Smart Indoor Modules measure CO2 levels in ppm (parts per million). All modules are calibrated by us during the manufacture of the product. CO2 sensors are calibrated automatically every week to better adapt to the environment around them.
How do you calibrate a Netatmo rain gauge?
Procedure
- Go to Settings > Manage my Home.
- Select the room where the Rain Gauge is located.
- Click on the module.
- In Configurations select Rain.
- Enter the value in the corresponding field.
How do Netatmo modules communicate?
The outdoor module (small) wirelessly sends its measurements to the indoor module (large) using a radio signal. Using your Wi-Fi access point, the indoor module then sends both its own measurements and the outdoor module’s measurements to your personal online Netatmo account.