How do I change the temperature on my hunter thermostat?
Hold down one of the UP/DOWN arrow keys until the display flashes. Use the arrow keys to move the temperature setting to the desired temperature. Press the HOLD/RETURN button. The thermostat will now hold the temperature at the setting until the override is cancelled.
How do I reset my hunter AC thermostat?
Press and hold the Programs button, and at the same time press in the recessed Reset button with the tip of a ballpoint pen. Release the Reset button and continue holding the Programs button until the Reset Memory screen appears (then release the Programs button).
How do you program a hunter 44550 thermostat?
Operating Instructions for an Energy Star 44550
- Set the time by pressing and holding the “Hour” button until the current hour appears.
- Press “Auto Program” to use the pre-set program for the thermostat.
- Slide the “System Selector” switch to either “Heat” or “Cool” to make changes to the current program.
How do I bypass my Indiglo thermostat?
Temporary Temperature Override
- Press the + and – buttons to set the temperature to a new level.
- Press DONE/HOME. This will lock in the new temperature, but only until the next program period is due to begin.
Why does my hunter thermostat change by itself?
Solution: Switch out your batteries. It can be as simple as switching out the batteries on your thermostat device. This could also be the reason your screen can go blank sometimes. Thankfully, most thermostats should tell you when the time comes to replace them.
Why is my hunter thermostat not working?
If the thermostat is failing to activate the air conditioner or heating unit as desired, first be sure the selector switch is in the correct location. If you are still having problems, turn off power to the thermostat, remove its faceplate and confirm that the wires are connected to the proper terminals.
How do I reset my Hunter EC Controller?
Resetting the EC controller
- Press and hold down the , and buttons.
- Press and release the RESET button in the lower wiring compartment.
- Wait 2 seconds and release the , and buttons. The display should now show 12:00a. m.
- All the memory has been cleared and the controller may now be reprogrammed.
How do I program a hunter 44155c thermostat?
Press Hold/Return at any time to exit Program mode.
- Slide the System Switch to HEAT or COOL to program the corresponding system.
- Press Program to enter Program mode. (
- Press Up or Down to change the hour.
- Press Up or Down to change the minute.
- Press Up or Down to set the temperature.
How do I get my thermostat off hold?
- Press + or – to adjust the temperature.
- TEMPORARY HOLD is displayed and the setpoint temperature flashes. While it’s flashing, press Hold (Mode) button to change to Permanent Hold.
- To cancel the Permanent Hold, press + or – and then press Cancel.
How do you reset an EC?
If your system becomes unstable or encounters any unexpected problems during an update, resetting the EC may fix the problem.
- Turn the laptop off.
- Disconnect the charging apparatus.
- Locate the EC reset hole at the back of your laptop.
- Straighten a paperclip and then insert it into the EC reset hole.
How do I reset my Hunter XC irrigation controller?
Resetting the XC controller
- Press and hold down the , and buttons.
- Press and release the RESET button in the lower wiring compartment.
- Release the , and buttons. The display should now show 12:00a. m.
- All the memory has been cleared and the controller may now be reprogrammed.
How do I reset my hunter 44110 thermostat?
You will need to reprogram if you hold the reset button down for 5 seconds and use a small pin or paperclip. If you did that. Press hold twice and hold the temperature until you change it.
Can I override the thermostat?
All thermostats can be overridden, so you can have the heating on or off regardless of temperature.