What grit is Meguiars M105?
1200 grit
Meguiar’s M105 Mirror Glaze Ultra Cut Compound is formulated with exclusive, super-micro abrasive technology for removing below surface defects like scratches, acid rain, severe swirls and holograms, and up to 1200 grit sanding marks.
What is M105 Compound?
Description. Megs M 105 Ultra Cut Compoundis an ultra fast cutting compound for rapid paint correction with minimal compounding swirls.Super micro abrasives cuts while leaving a finish that requires very little finishing work.
What is M205 Speed?
Set rotary buffer to approximately 1000-1500 RPM’s. Use with appropriate foam pad of choice. To prime new or dry pads, mist on some quick detailer. Apply M205 Ultra Finishing Polish directly to the paint surface and begin working on a 2’x2′ area with overlapping passes.
Does meguiars M205 have fillers?
M105 and M205 are body shop safe, no fillers.
What do I do after meguiars M105?
Utilizing the same super-micro abrasive technology, M205 is the perfect follow up to M105 to remove slight hazing and to restore a deep gloss, and it acts as a great one step polish to remove light swirls and defects.
Do I need polish after ultimate compound?
Like NFA stated UC always leaves me with a good finish when used with a orange ccs pad. Just follow up with any light polish such as Ultimate Polish or M205. If using ultimate polish remember to wipe or wash away all the oils left behind to see the true condition of the paint.
Does Meguiars Ultimate Compound remove paint?
Whether working by hand or with our DA polisher, this is truly the ultimate compound! Remove water spots, oxidation, swirls, scratches, blemishes, and more from all types of paint – even clear coats!
What pads to use with M205?
Recommended pads to use with Meguiar’s 205 Ultra Finishing Polish: Buff and Shine Uro-Tec Yellow Polishing Pad – The ideal choice for a well-rounded polishing pad. It has enough cut to remove defects and compounding swirls while finishing down on most paint types.
Will M205 remove swirls?
M205 permanently removes swirls and light defects from all paints, and can be applied by hand, by a random orbital polisher, like the PC 7424XP, or by rotary, such as the Makita 9227C.
Do you wax after compound?
The simplest answer is just to check your work after the compounding stage with proper lighting. If there is any micro-marring or hazing from the compounding stage, then use a finishing polish before your wax/sealant.
What should I do after M105?
What comes first polish or compound?
After compounding, polish is used to remove any remaining defects. A handheld polishing machine has a motorized spinning head that can spread polish on a car’s surface to remove microscopic layers of paint and restore a vehicle’s smooth surface.
Is Meguiars Ultimate Compound A one step?
Meguiar’s exclusive micro-abrasive technology cuts as fast as a traditional compound, but without scratching. Meguiars Ultimate Compound leaves a smooth, swirl-free finish often in one step.
Do I need to polish after Meguiars Ultimate Compound?