What is TMP36 used for?
The TMP35/TMP36/TMP37 are low voltage, precision centi- grade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius (centigrade) temperature.
What is the voltage range that TMP36 temperature sensor produced as analog output *?
The TMP36 is specified from −40°C to +125°C, provides a 750 mV output at 25°C, and operates to 125°C from a single 2.7 V supply.
What type of sensor is TMP36?
precision centigrade temperature sensor
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.
What is TMP 35?
The TMP35/TMP36/TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius (centigrade) temperature.
How do you calculate TMP36 temperature?
How to Measure Temperature. Using the TMP36 is easy, simply connect the left pin to power (2.7-5.5V) and the right pin to ground. Then the middle pin will have an analog voltage that is directly proportional (linear) to the temperature. The analog voltage is independent of the power supply.
What is output of LDR?
The LDR gives out an analog voltage when connected to VCC (5V), which varies in magnitude in direct proportion to the input light intensity on it. That is, the greater the intensity of light, the greater the corresponding voltage from the LDR will be.
What is the range of LDR?
An LDR’s resistance, RLDR can vary from about 100Ω in the sun light, to over 10MΩ in absolute darkness with this variation of resistance being converted into a voltage variation at VOUT as shown. One simple use of a Light Dependent Resistor, is as a light sensitive switch as shown below.
Which sensor is used for humidity?
Thermal humidity sensors are used to measure absolute humidity. Unlike RH sensors, thermal humidity sensors utilize two probes, one to measure dry nitrogen and one to measure the air of its surrounding environment.
What is a tmp36gz temperature sensor?
The TMP36GZ temperature sensor is an easy to use analogic component for temperature ranging from -40°C to 125°C; output voltage is linearly proportional to temperature.
What is the temperature output of the tmp35/tmp36/tmp37?
TMP35/TMP36/TMP37 are low voltage, precision centi-grade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP35/TMP36/TMP37 do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.
What leads are available in the tmp35/tmp36/tmp37 family?
The TMP35/TMP36/TMP37 are available in low cost 3-lead TO-92, 8-lead SOIC_N, and 5-lead SOT-23 surface-mount packages. At least one model within this product family is in production and available for purchase.
Is the tmp36 compatible with the LM50?
The TMP36 is specified from −40°C to +125°C, provides a 750 mV output at 25°C, and operates to 125°C from a single 2.7 V supply. The TMP36 is functionally compatible with the LM50.