What size is the anode for Suburban water heater?
Your Suburban SW6DEL takes a 3/4 inch anode rod like the part # CAM11563 which would work well. This is made from aluminum and is the recommended replacement for your water heater.
Are all RV water heater anode rods the same size?
RV anode rods are typically a standard size. They’re most commonly 9.25” long and use ¾” threads that require a 1-1/16” socket. However, it’s best to confirm any specifics regarding your water heater with the manufacturer.
How do I know what size anode rod to buy?
As a rule you want the anode to be “tip to toe” running the full height or length of the tank. If you cant see your brand on the chart then just measure the length of the tank and pick the closest length of anode. If the anode is too long they can be simply cut to length with a hack saw.
Do all Suburban water heaters have anode rods?
“All Suburban water heaters are protected by a magnesium or aluminum anode to prolong the life of the tank.
Are RV anode rods universal?
In most cases, water heater anode rods are universal. The only exceptions are : Buderus : They use another type of threading to install the magnesium anode.
Which anode rod do I need?
Magnesium anode rods are expected to work better in a home with soft water. Aluminum anodes are appropriate for homes with hard water and a high PH. Zinc anodes work best if a home is starting to smell like rotten eggs and is best for replacing water heaters that already dissolved.
Which anode rod is better aluminum or magnesium?
Magnesium anode rods extend the life of your tank better than aluminum anode rods and offer significant health benefits, making them a much better value despite the higher price tag.
How often should I replace my RV anode rod?
Remove the anode rod (if applicable) These need to be replaced every 1-3 years depending on how often the tank is used. If you check your anode rod and notice that it’s heavily corroded, then it’s doing its job of protecting your expensive tank.
Can an anode rod be cleaned and reused?
You cannot clean your anode rod in your water heater . However, it is important to inspect the sacrificial anode rod every 1 to 3 years and replace it after more than 50% of its wear and tear to avoid corrosion of your tank.
How often should you replace RV water heater anode rod?
every 1-3 years
Remove the anode rod (if applicable) Instead, they attack the anode rod. These need to be replaced every 1-3 years depending on how often the tank is used. If you check your anode rod and notice that it’s heavily corroded, then it’s doing its job of protecting your expensive tank.
What anode rod is best for RV water heater?
Magnesium Rod.
How long is an anode rod for a 40 gallon water heater?
Some anode rods are 33 inches in length, while others are 44 inches in length. You may need to cut it down to fit your water heater if you have a smaller unit (often referred to as a ‘low boy’ or ‘stubby’) that is only 30 or 40 gallons.
How tight should anode rod be?
Once you get the anode rod inside, tighten it by hand until you cannot anymore. Then, use the socket wrench to tighten it a bit more, about 1/2 turn, 180 degrees. Do not tighten so hard that the water heater begins to move or twist.
Can you clean an anode rod?
Which anode rod is best?
Which is a better anode rod aluminum or magnesium?
What is the best anode rod for an RV water heater?
Fast Shipping! Suburban’s magnesium anode rod is perfect for use in RV water heaters. The anode rod absorbs the corrosive effects of hot water to extend the life of your water heater’s tank. Remember to replace worn anodes to insure consistent protection.
Can you use a magnesium anode rod in a water heater?
Product description. Suburban’s magnesium anode rod is perfect for use in RV water heaters. The anode rod absorbs the corrosive effects of hot water to extend the life of your water heater’s tank. Remember to replace worn anodes to insure consistent protection.
What are the dimensions of the suburban 232767?
Suburban 232767 6.7 ounces 11.61 x 4.84 x 1.26 inches 232767 No 232767 Would you like to tell us about a lower price? .
What are the dimensions of a suburban suburban?
Suburban Suburban 6.4 ounces 1.86 x 0.78 x 0.15 inches 232767 No SB232767 No Anode Rod Would you like to tell us about a lower price? Brand New. In original packaging. Packaging is a little worn.