Why does my Stihl trimmer not start?
If you’ve used the correct procedure to start your Stihl trimmer and it does not start, the problem is likely related to either the spark, the fuel or the air circulation in the combustion chamber. More often than not, it’s an easy fix, possibly involving replacement of a spark plug or air filter.
How do you start a Stihl FS 55c?
Press the throttle trigger lockout and hold it down. At the same time press the throttle trigger until the detent engages with the tab on the housing. When the throttle trigger is engaged, first release the throttle trigger and then the throttle trigger lockout. The machine is now in the starting throttle position.
Which way is off on a Stihl weedeater?
On any Stihl machine the on position of a switch is signified by the I or 1 symbol and the off position or kill switch position is designated by the O symbol.
How do I know if the choke is on or off?
The “choke” is off when the choke lever is down or when the choke lever is facing you if your choke is a handle bar mount. Choke off means that the choke plate is not covering the carb throat.
How do you tell if the choke is open or closed?
Turn on the ignition of your car. Once the engine is warm, you can remove the air filter and check whether the choke is open or closed. At this point, the choke should be open to allow the engine to breathe fully.
Can improper use of Stihl FS 100 RX cause serious or fatal injury?
cause serious or fatal injury. mortales. Page 1 STIHL FS 100 RX Instruction Manual Manual de instrucciones WARNING Read Instruction Manual thoroughly before use and follow all safety precautions – improper use can cause serious or fatal injury.
What is an FS 100 RX Trimmer?
FS 100 RX English 3 The terminology utilized in this manual when referring to the power tool reflects the type of cutting attachments that may be mounted on it. The term “trimmer” is used to designate an FS unit that is equipped with a nylon line head or a head with flexible plastic blades (i.e., the PolyCut head.)
How do you replace the head on a FS 100 RX mower?
Pull the spool up – rotate it about 1/6 turn counterclockwise until it If necessary, remove the mowing engages – and allow it to spring head. back. Pull ends of the lines outward. FS 100 RX… Page 31 Remove the mowing head.
How do you use an FS100 RX English 22 brushcutter?
FS 100 RX English 22 Balance the brushcutter. N Adjust the carrying ring. N Tighten the screw moderately. N Let go of the brushcutter and check to see how it is balance – the cutting tool should just touch the ground in the normal working position. N Move the carrying ring as required.