Why is my router working but no Wi-Fi?
Restart your modem, router, and device Restarting your modem and router should be the first thing you do when encountering an internet signal issue. Don’t skip this step! This is almost always what tech support will ask you to try first, as it often solves the problem.
How do I reset my Belkin G wireless router?
Reset Button
- Locate the “Reset” button on the Belkin router.
- Push the “Reset” button and then release it to reset the router.
- Push the “Reset” button and hold it for at least 10 seconds to start the “Restore to Factory Defaults” process.
- Release the button after the 10-second minimum.
Why does my Belkin router keep losing connection?
Your router or wireless computers may be losing connectivity because of physical obstacles such as walls and floors. Try to move the computers to a different location to find a better signal. The most ideal location would be at the central part of your house.
How do I setup my Belkin G wireless router?
Manually setting up the Belkin router
- Unplug the modem and router from the power source.
- Connect the Ethernet cable from the modem to the WAN or Internet port of the router.
- Power ON your modem first, then your router by plugging them back to the power source.
Why did my Wi-Fi randomly stop working?
If you’re too far from your router, your internet may cut in and out as Wi-Fi signals struggle to reach your device. Obstructions between your device and your router may also cause intermittent disconnections. Pay attention to your device’s Wi-Fi signal meter to see where your Wi-Fi signal gets weak and disconnects.
What is WPS on Belkin router?
Wi-Fi Protected Setup™ (WPS) is a feature that lets you easily connect WPS-supported client devices to your router wirelessly. This article will give you instructions on how to use the WPS button on your Belkin wireless router.
How do I get my Belkin wireless router to work?
Unplug the modem, the router and the computer (in that order) from their respective power outlets then wait for 30 seconds before plugging them back. Re-plug the modem first followed by the router and then the computers.
How do you know when router is broken?
5 Signs You Need a New Router
- Your router is more than 5 years old. Technology changes quickly.
- You’re renting a router from your ISP.
- Your Wi-Fi network has connection issues.
- Your Wi-Fi range and speeds are getting worse.
- Your router runs hot.
How do I restart my WiFi router?
Step 1: Unplug the modem and router from the power outlet. Step 2: Wait at least 15 seconds. Step 3: Plug the modem back into the power outlet first, wait 1-2 minutes, then it’s time to power on the router. Step 4: Wait for all panel lights on your cable modem to become green on before testing your internet connection.
How do I enable WPS on my router?
To turn on / off WPS, the security type must not be set to None or WEP.
- Access the router configuration main menu.
- From the Top menu, click.
- Click.
- Under Turn Wireless On (step 6 on the Basic Security Settings section), ensure WPS is set to On / Off.
- Scroll to the bottom of the page then click.
Why is my Belkin Wi-Fi router orange?
A solid orange light on your Belkin router usually tells us that there is a connection between the modem and the router, but the modem isn’t connected to the Internet.
What is the default IP address for Belkin wireless router?
192.168.2.1
NOTE: The default IP address of a Belkin router is 192.168. 2.1. You need to check the IP address range and Default Gateway to assign it to a computer when assigning a static IP address.
Do wireless routers wear out?
As a rule of thumb, a Netgear representative told us, consumers should consider replacing their router after three years, and representatives from Google and Linksys said a three-to-five-year window was appropriate. Amazon, which owns the popular Eero brand of routers, put the range at three to four years.