What happens if 2 routers have the same SSID?
3 Answers. Show activity on this post. Two identically named SSIDs with the same password will allow your device to connect to either, without having to add any extra networks on your devices. If both routers are broadcasting from the same location, the expected behaviour will vary depending on device.
Does an access point keep the same SSID?
You can give the access point the same SSID as your main network. That does not make it a mesh so roaming will not be automatic but still workable. You need a Ubiquiti or like device to make a mesh.
CAN devices on different SSIDs see each other?
No, just having different SSIDs as per your diagram would put Computer B on the same network as your other machines. It would be able to communicate with everything else on your network. The SSID is just used as an identifier for the wireless connection your adapter will connect to.
How do I configure two routers with the same SSID?
Connect an Ethernet cable between a LAN port on each router. Don’t use the WAN port on the secondary router. Turn off the DHCP function on the secondary router. Let your primary router assign IP addresses.
Is it better to have the same SSID for 2.4 and 5ghz?
It’s highly dependent on your situation and requirements. If you are working with just a lone Wi-Fi router, then using the same SSID on both bands can help devices stay connected, especially in areas where 5 GHz can’t reach but 2.4 GHz can.
What happens if two nearby access points use the same channel?
When two or more access points or wireless clients (stations) that are in range of one another, operate on the same channel, they form one collision domain. If any two devices in the same collision domain transmit at the same time, their radio signals will collide, resulting in corruption or frame loss.
How many is too many SSIDs?
No more than 3 SSIDs should be enabled on any single AP. Each SSID should have band-steering enabled. Legacy bit rates should be disabled on each SSID. Only enable an SSID on an AP if needed.
Is it better to have one SSID or two?
Should dual band router have same SSID?
If you are working with just a lone Wi-Fi router, then using the same SSID on both bands can help devices stay connected, especially in areas where 5 GHz can’t reach but 2.4 GHz can.
Should I split WIFI 2.4 and 5?
No. What you want to do, is get as many devices setup using 5Ghz, and use the 2.4Ghz as a fall-back. The reason is that because 2.4Ghz bands overlap, 2.4Ghz is usually very overcrowded with neighbour networks. 5Ghz allows a faster speed too depending on the specifications.
Can I use two routers with one internet connection?
Home wireless routers can be connected using Ethernet cable in the same way as wired routers are connected. Connecting two home routers over wireless is also possible, but the second router can only function as a wireless access point instead of a router in most configurations.
Can two wireless access points interfere with each other?
Nothing wrong with this as long as the access points use non-overlapping channels. If the channels do overlap it could cause a situation where their access points interfere with each other. This can cause packet loss during browsing and a negative internet experience for those using your WiFi network.
Should 5GHz have different SSID?
Separate your Wi-Fi bands into separate SSID’s for use on a single AP can add benefits you might not have thought of. It might seem like the main advantage of using the same SSID is that your devices can roam between 2.4Ghz and 5Ghz and pick what they use. It is easy to set up on your devices and seems carefree.
Should I name my 2.4 GHz and 5GHz same SSID?
How many SSIDs is too many?
3 SSIDs
No more than 3 SSIDs should be enabled on any single AP. Each SSID should have band-steering enabled. Legacy bit rates should be disabled on each SSID. Only enable an SSID on an AP if needed.
What happens when you have 2 routers?
The benefits of a two-router network include: Support for more wired devices: If the first router is the wired Ethernet kind, it supports a limited number of connected devices (typically only four or five). A second router provides more open Ethernet ports so that additional computers can join the network.