What is Cisco WiSM?
The Cisco WiSM is a WLAN controller services module for the Cisco Catalyst 6500 Series modular switches and Cisco 7600 Series routers.
What does WISM mean?
WISM
| Acronym | Definition |
|---|---|
| WISM | Wireless Services Module |
| WISM | Wireless Services Module (provides communication between lightweight access points and other WLAN controll) |
| WISM | Web Information Systems Modeling (professional workshop) |
| WISM | Women in Science and Mathematics (college program; various locations) |
What is WiSM2?
Cisco Wireless Services Module 2 (WiSM2) – Cisco.
How do I change the SSID on my Cisco WLC?
Editing WLAN SSID or Profile Name for WLANs (CLI)
- Disable the WLAN first before changing the profile name or SSID by entering this command: config wlan disable wlan_id.
- Rename the WLAN profile name or SSID by entering this command: config wlan ssid wlan_id ssid. config wlan profile wlan_id profile-name.
How do I reset my WLC password?
Cisco 4400 Series Wireless LAN Controllers – How to Recover the Password on a WLC
- After the controller boots up, enter Restore-Password at the user prompt.
- At the Enter User Name prompt, enter a new user name.
- At the Enter Password prompt, enter a new password.
- At the Re-enter Password prompt, re-enter the new password.
How do I reset my Cisco wireless controller?
Procedure
- Start your Internet browser.
- Enter the controller IP address in the browser address line and press Enter.
- Enter your username in the User Name text box.
- Enter the wireless device password in the Password text box and press Enter.
- Choose Commands > Reset to Factory Default.
- Click Reset.
What is 802.11 R the standard for?
IEEE 802.11r serves as a fast-roaming standard that addresses connectivity and is critical to applications that require high quality and low latency, particularly Voice over Internet Protocol (VoIP). IEEE 802.11r is also known as the fast basic service set.
Does my device support 802.11 R?
To use 802.11k and 802.11r, you need iOS 6 or later or macOS 12 or later. To use 802.11v, you need iOS 7 or later or macOS 12 or later. To use adaptive 802.11r, you need iOS 10 or later or macOS 12 or later. macOS support is limited to only Mac computers with Apple silicon.
How to configure the Cisco WISM controller?
With the completion of basic configuration, the administrator can configure the Cisco WiSM controller through the console CLI or through the Cisco WiSM controller web-interface. In order to use the session command, you must make sure that the service port on the Cisco WiSM is assigned a static or DHCP assigned IP address.
What is the service port used for on a Cisco WISM?
Read Configuring a Cisco Wireless Services Module and Wireless Control System for details of each of the type of interfaces. On the WiSM, the service port is used to synchronize the Supervisor Engine and the WiSM.
Does VSS support Cisco WISM integration?
The first release of VSS and Cisco WiSM integration is supported on Cisco WiSM software release 4.2.130.0 and later along with Cisco IOS Software Release 12.2 (33)SXI IOS. The next few paragraphs describes how the integration and deployment of Cisco WiSM in VSS environment is done seamlessly and does not require special configuration.
How many Cisco wisms can the Catalyst switch chassis support?
Note: Without any other service module installed, the Catalyst 6509 switch chassis can support up to seven Cisco WiSMs, the Catalyst 6506 with a Supervisor 720 can support up to four Cisco WiSMs, and any other Catalyst 6500 series switch chassis can support up to six Cisco WiSMs.