What is Focusrite Platinum OctoPre?
The Platinum OctoPre is a Focusrite mic preamp featuring eight pristine Focusrite channels. OctoPre routes directly to any digital audio workstation via analog outputs or a new 24-bit/96kHz A/D converter. The OctoPre offers the unique qualities associated with the Focusrite name at an affordable price.
What does focusrite OctoPre do?
ADAT uses inexpensive “light-pipe” optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you’re ready to go….Features.
| Category | Studio Gear |
|---|---|
| Brand | Focusrite |
How does a Scarlett OctoPre connect to an audio interface?
Digital Outputs Use the ADAT OUT optical port(s) [13] to connect the Scarlett OctoPre to the ADAT input(s) of an audio device using TOSLINK optical cable(s). The right-hand port (as viewed from the rear of the unit) can transmit eight channels of audio at 44.1 kHz or 48 kHz sample rate via a single optical cable.
Does Focusrite Scarlett have a mic preamp?
The Focusrite Scarlett series are audio interfaces that have preamps built within them. Preamps amplify weak signals to the appropriate level for recording. Without them, the signal from your microphone or guitar would be too quiet.
What is an ADAT interface?
What is ADAT? ADAT is an optical audio protocol designed to transfer digital audio to and from two audio devices. At 44.1/48kHz sample rates, ADAT can transport 8 channels of uncompressed digital audio to and from an interface and peripheral device with just one Toslink cable.
Should I use the air button on Focusrite?
Air is designed to minimise noise and keep your recording clean and pure. Although Air is 100% analogue, you can use Focusrite Control to turn Air on and off using Mac, PC or iOS devices.
Is ADAT still used?
Though the ADAT may no longer be with us, it does live on through the ADAT Lightpipe protocol with its fibre-optic transmission of up to eight channels of digital audio at once. Nearly 30 years on, that’s not to be sniffed at.
Is ADAT the same as Spdif?
SPDIF is a two-channel protocol which was designed for electrical transmission (but can use optical transceivers), and ADAT is an 8-channel protocol intended for optical transmission.
Is ADAT analog or digital?
Alesis Digital Audio Tape (ADAT) is a magnetic tape format used for the recording of eight digital audio tracks onto the same S-VHS tape used by consumer VCRs.
Does Apollo Twin have ADAT out?
If your interface has ADAT (which all UAD interfaces do) you will be able to expand the amount of inputs and outputs by 8. Meaning a UAD Apollo Twin with two inputs and 4 outputs can be expanded to 10 inputs and 12 outputs.
Does the Apollo Twin have ADAT?
You would be limited to 44.1k @ 8 channels as the twin only has a single ADAT in. Low cost, 6 great sounding clean preamps and 2 epic sounding HMX channels.
What does the 48V button do on Focusrite?
Condenser microphones require power to work, on Focusrite interfaces when you press the ’48V’ button, phantom power (48V) is sent to the XLR microphone input for that input (or inputs). 48V Phantom power is not sent to any 1/4″ jack inputs, these are used for line or instrument inputs.
Are the Focusrite octopre MkIIs any good?
As with the rest of Focusrite’s Saffire range, the quality-for-the-price of the Octopre MkIIs is excellent. That said, both units are priced above the budget ADAT-equipped mic‑preamp competition (Behringer’s ADA8000), and they’re only marginally lower in price than Focusrite’s audio interfaces, which can perform pretty much the same role.
What’s the difference between the octopre MKII and Saffire PRO 40?
“OctoPre MkII remains an eight-input pre-amp, featuring the same high-quality pres that have featured throughout Focusrite’s popular Saffire range of audio interfaces.” OctoPre MkII’s design update delivers some significant new features too and brings appearance and performance into line with the Saffire Pro 40 in particular.
How many inputs does the octopre MkII have?
As its name suggests, the OctoPre MkII remains an eight-input pre-amp, featuring the same high-quality pres that have featured throughout Focusrite’s popular Saffire range of audio interfaces.
Are Focusrite mic preamps any good?
Focusrite have revamped, updated and rationalised their eight‑channel mic preamps with these models, and while there are cheaper alternatives available, the Focusrite brand, in my opinion, still offers the optimum balance of price/performance for the budget‑conscious home‑studio owner.