What is a JIC hose fitting?
JIC fittings, defined by the SAE J514 and MIL-DTL-18866 standards, are a type of flare fitting machined with a 37-degree flare seating surface. JIC (Joint Industry Council) fittings are widely used in fuel delivery and fluid power applications, especially where high pressure (up to 10,000 psi) is involved.
What is ORSF?
Connection Types: ORFS (O-ring Face Seal) This is known as an elastomeric seal. The seal is created when the o-ring compresses between the o-ring face of the fitting and flat face of the mating ORFS fitting or the formed tube.
Is JIC the same as UNF?
The only effective difference is that JIC (also known as SAE 37 degree) has a conical seating face (37 degree or 74 degree total angle) and UNF Straight has a flat seat – sealing being effected by use of a washer. Male JIC fittings have a convex cone, female fittings a concave cone.
Are SAE and JIC fittings interchangeable?
SAE and AN/JIC fittings are completely incompatible due to the different flare angle. Furthermore, AN fittings (or those complying with subsequent standards) and JIC fittings are not interchangeable for design-controlled applications due to differing quality standards.
What is a flat face O-ring?
Flat Face O-Ring Hydraulic Fittings use high durometer flat rubber O-rings to effect a gasket like soft seal. The O-ring nests in a special groove machined in the face of the fitting body.
What does JIC stand for hydraulic?
Joint Industry Council
JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel. JIC Fitting hydraulic connections are common in most fluid power systems.
How many ORFs are in this sequence?
ORF Finder: In each direction of the DNA there would be 3 possible reading frames. So total 6 possible reading frame (6 horizontal bars) would be there for every DNA sequence. The 6 possible reading frames are +1, +2, +3 and -1, -2 and -3 in the reverse strand.
Is UNF and JIC the same?
JIC / SAE 37 degree / UNF Straight. The only effective difference is that JIC (also known as SAE 37 degree) has a conical seating face (37 degree or 74 degree total angle) and UNF Straight has a flat seat – sealing being effected by use of a washer. Male JIC fittings have a convex cone, female fittings a concave cone.
What is the difference between an fittings and JIC fittings?
JIC fittings are also commonly confused with AN (Army Navy) fittings. Although the two are dimensional identical, the AN military standard calls for tighter tolerances and defines all fitting types, where the JIC uses AN specifications as the base line for their own standards and covers fewer sizes.
Who is ORFs fittings?
ORFS Fittings – O-ring face seal Tube fitting & Hydraulic Fittings FAV is manufacturer and Exporter of O-ring face seal (ORFS Tube fittings .We have all types fof ORFS Fittings like Adaptors,Elbow,Swivel Fittings,Tee & Cross
What are O-ring face seal hydraulic tube fittings?
The threads hold the connection mechanically. SAE J1453 O-Ring Face Seal hydraulic tube fittings offer the best leak protection available today.
What are the parts of a soft seal o ring?
How Soft-Seal O-ring Face Seal Fittings Work The Soft-Seal fitting assembly consists of four parts: threaded fitting body with o-ring groove, o-ring, nut, and sleeve or tailpiece. The standard o-ring is Buna-N.
What are the specifications of seal Lok O-ring fittings?
Specifications Met: All Seal-Lok O-ring Face Seal fittings meet or exceed the strict requirements of SAE J1453. Our Seal-Lok O-ring Face Seal fittings with ISO 6149 metric ports also meet ISO 8434-3. FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.