How do I calibrate my GHC 10?

Posted on by David Darling

How do I calibrate my GHC 10?

To calibrate using a GHC: Select Dealer Autopilot Setup….

  1. Press Options.
  2. Press Settings.
  3. Select Preferences.
  4. Select Units.
  5. North Reference – Change to match GHC.

What is dockside wizard?

The Dockside Wizard and the Sea Trial Wizard are used to configure the autopilot. These wizards walk you through the necessary configuration steps.

How do I change the fuel level on my Garmin?

Select A/V, Gauges, Controls > Engines > Menu. Select an option: After you have filled up all the fuel tanks on the vessel, select Fill Up All Tanks. The fuel level is reset to maximum capacity.

How do I calibrate my Garmin autopilot?

The magnetic heading from the Garmin Autopilot only indicates which direction the bow is pointing….Make sure the boat is evenly loaded.

  1. Select Dealer Autopilot Setup.
  2. Select Compass Setup.
  3. Select Calibrate Compass – Begin.

How do I reset my Garmin autopilot?

To perform the master reset, follow the instructions below:

  1. With the autopilot fully powered OFF, press and hold the Left and Middle Soft Keys of the GHC 10 display of the autopilot.
  2. Continue to hold the buttons from the first step and press and hold the Power button.

How do you bleed a Garmin autopilot?

Bleeding an Autopilot Hydraulic Steering System

  1. Begin on the Heading page.
  2. Press Menu.
  3. Choose Setup.
  4. Choose Dealer Autopilot Setup (GHC 20) or Dealer Autopilot Configuration (GHC 10)
  5. Choose Steering System Setup.

How do I calibrate my Garmin fuel gauge?

Calibrating the Fuel Level Information of a Fuel Tank with a GFS…

  1. Select the GFS 10 connected to the fuel gauge or sensor on the boat.
  2. Select Review if it appears.
  3. Select Calibration.
  4. Select Level Calibration.
  5. Select Add Calibration Point.
  6. Enter a calibration point that corresponds to the current fuel level in that tank.

What does Garmin SteadyCast do?

SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen.