How do I add a DSC wireless device?
- Step 1 – Connect the wireless receiver to the KEYBUS.
- Step 2 – Program the Zone Definitions.
- Step 3 – Program the Zone Attributes.
- Step 4 – Partition Zone Assignment.
- Step 5 – Enroll Wireless Devices.
- Step 6 – Disabling Supervision of Panic Zones.
- Step 7 – Wireless Supervisory Window.
- Step 8 – Perform a Module Placement Test.
What is a DSC box?
Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.
What is DSC PowerSeries?
PowerSeries Neo captures the flexibility of a modular, hardwired system with the simplicity of a wide range of wireless devices and peripherals, resulting in a ground-breakingly comprehensive and versatile hybrid system suited for small business structures through to large-scale commercial applications.
How many wireless zones can a DSC neo have?
16 zones
The DSC NEO HS2016 is the smallest capacity panel in the DSC NEO line. This panel can handle a combination of up to 16 hardwired and wireless devices. So, it can handle 16 zones.
How do I delete a wireless zone on DSC Neo?
Complete the following steps to delete a wireless zone from a DSC PowerSeries NEO:
- Enter wireless programming. Start from the main screen of your push-button keypad.
- Access delete zone menu. On your keypad, enter [901].
- Delete the zone.
- Return to main screen.
How do I register my DSC wireless smoke detector?
You can enroll the PowerG Smoke Detectors by first putting a PowerG-compatible Panel into its auto-enrollment mode. Then pressing and holding the enrollment button on the PowerG Smoke Detector until the LED light is steady. This applies to the DSC PG9916 and the DSC PG9926 Smoke Detectors.
How do I reset my DSC after a power outage?
The simplest is to power it down and then power it back on, which is called a power reset. Open up the panel and look for the power button. Hold it down until the panel turns off and there aren’t any lights on. Wait a few seconds and then power it back on by pressing the button again.
What kind of keypad does DSC use?
DSC Alarm Keypads DSC Keypads for the DSC Power Series alarm systems. We carry all keypad styles for the Power Series line, including the newly released PK and RFK model keypads. 5508Z, 5516, 5501Z and 5500Z models.
What is an alpha-numeric LCD keypad with 433 MHz receiver?
The next keypad we offer in the alpha-numeric line if the DSC RFK5500alpha-numeric LCD keypad with built-in 433 MHz receiver. This receiver can be used to interact with the DSC 433 MHz wireless devices.
What is the difference between the DSC pk5508 and pk5516?
The PK5508 has 8 LED lights for zones 1-8 and the PK5516 has 16 LED lights for zones 1-16. Both of these keypads make good secondary keypads but should not be relied upon to use to program your DSC alarm with. Lastly, for you technology lovers, we have the touchscreen style keypads from DSC.
Which DSC touch screen can be used with the DSC impassa?
The next touchscreen is wireless and can be used with the DSC IMPASSA, DSC Alexor, and the hardwired 1616, 1832, and 1864 if they have the DSC TR5164-433 transceiverwired into the system. The DSC WTK5504is a wireless color touchscreen arming station.