Skip to content

Squarerootnola.com

Just clear tips for every day

Menu
  • Home
  • Guidelines
  • Useful Tips
  • Contributing
  • Review
  • Blog
  • Other
  • Contact us
Menu

What is the density of Inconel 625?

Posted on October 19, 2022 by David Darling

Table of Contents

Toggle
  • What is the density of Inconel 625?
  • What is the density of Inconel?
  • Is Inconel lighter than stainless steel?
  • What is Inconel 625?
  • What is the chemical composition of the steel alloy?

What is the density of Inconel 625?

8.44 g/cm³
Properties of Alloy 625

DENSITY 8.44 g/cm³ | 0.305 lb/cu in
MELTING POINT 1290-1350°C | 2350-2460 °F

What is the density of Inconel?

8.17 g cm‐3
The density of solid Inconel 718 alloy is 8.17 g cm‐3 at the room temperature of 300 K.

What is the hardness of Inconel 625?

Inconel 625

Alloy state Tensile strength Rm N/mm² Brinell hardness HB
625 760 ≤220

Is Inconel heavier than stainless steel?

Additionally, though the melting point of this particular type of Inconel is lower than that of 304 stainless steel, it has a higher operating temperature limit….So, is Inconel Stronger Than Steel?

Alloy Inconel 625® 304 Stainless Steel
Melting Point 2,350-2,460°F (1,290-1,350°C) 2,550-2,650˚F (1,400-1,455˚C)

Is Inconel lighter than stainless steel?

For example, stainless steel grade 316 appears to have better chlorine resistance than stainless steel grade 304 (but it also has an average higher cost)….Why Comparing Inconel Vs Stainless Steel Can Be Complicated.

Inconel 625 304 Stainless Steel
Tensile Strength 103-160 ksi (714-1,103 MPa) 73.2 ksi (505 MPa)

What is Inconel 625?

Inconel® 625 is a Nickel-Chromium-Molybdenum-Columbium (Niobium) alloy with excellent oxidation resistance, corrosion resistance, and strength at high temperatures.

What is Alloy 625?

Alloy 625 is a nonmagnetic , corrosion – and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix.

How to reduce the ductility of Alloy 625?

Approximately 15/20% reduction is recommended for finishing. Alloy 625 can be cold formed by standards methods. When the material becomes too stiff from cold working, ductility can be restored by process anneal. Low cutting speeds, rigid tools and work piece, heavy equipment, ample coolant and positive feeds are general recommendations.

What is the chemical composition of the steel alloy?

Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.

Recent Posts

  • How much do amateur boxers make?
  • What are direct costs in a hospital?
  • Is organic formula better than regular formula?
  • What does WhatsApp expired mean?
  • What is shack sauce made of?

Pages

  • Contact us
  • Privacy Policy
  • Terms and Conditions
©2025 Squarerootnola.com | WordPress Theme by Superbthemes.com