How do I access Optus WiFi settings?

Posted on by David Darling

How do I access Optus WiFi settings?

OTHER OPTUS DSL MODEMS/ROUTERS

  1. Your modem must be switched on and connected to your computer (wired or wirelessly)
  2. Open your internet browser and go to this address: http://192.168.8.1.
  3. Enter the default username (if required): admin.
  4. Enter the default password (if required): password.

How do I reset my Optus network settings?

Android network reset

  1. Open the Settings app.
  2. Tap General.
  3. Tap Reset.
  4. Tap Reset Network Settings.

Why is my Optus data not working?

Switch your device off (do not select restart), wait 30 seconds and turn it on again. If you’re using an external USB modem / dongle: Close your Optus Mobile Broadband Connection manager application and any other open applications. Eject and remove your USB modem / dongle from your computers USB port.

How do I activate my Optus mobile data?

Activate on the web Doing it over the internet requires you to go to Optus.com.au/activatesim. Follow the prompts as you would for a regular SIM card. When asked to put in a phone number, use the number of the My Plan Plus plan from with which it will be sharing data.

Why does my Optus WiFi keep dropping out?

It may be due to environmental factors, high volume web traffic or your 4G device has moved into a 3G coverage area. These troubleshooting steps can help to resolve your problem. Where possible, switch off WiFi/Bluetooth on all your connected devices and (if possible) plug directly into your mobile device.

How do I activate my data only SIM?

Have your SIM card and compatible device ready.

  1. Activate your data-only SIM. Open fi.google.com/data. Enter the code found on the packaging of your SIM card.
  2. Insert your SIM card. For Fi devices: Learn how to insert your SIM.
  3. Set up your device. For Android devices:

Why can’t I access router settings?

It may often be solved by restarting the router. This is the gateway to your router’s settings. It’s where you can change your Wi-Fi password, check for firmware updates, and configure your network. Regularly updating the firmware is also necessary as it could be part of the reason why you can’t access the router page.

How do I find Internet settings?

Swipe down from the top of the screen. Tap Internet. In the panel that appears, select a network….

  1. Open your device’s Settings app.
  2. Tap Network & internet. Internet.
  3. The network’s signal strength is on the Wi-Fi icon . A fuller icon means a stronger signal.