Which way do the teeth face on a chainsaw chain?
The correct direction for a blade to face is with the pointy edge of the blade teeth facing toward the way the blade rotates. Essentially, you want the pointy edges of the blades rotating on top of the chain bar, moving toward the tip of the bar, and away from the body of the machine.
Can you put a chainsaw chain on the wrong way?
Typically, a chainsaw will not cut right with a backward chain. In fact, from a safety perspective, if the chainsaw chain is set backward, then it technically means that all the cutters are facing you, which can be quite dangerous.
Do all chainsaw chains have a master link?
Many chainsaw chains now come with a master link. A master link is specifically designed to be easily removed in the event that the chain needs to be shortened.
Why does my Husqvarna chainsaw chain keep coming loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won’t change as you work your saw.
How tight should a Husqvarna chain be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.
Are chainsaw chains directional?
The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. So the sharp edges of the blade should always face the clockwise direction. If you check from the top, you will notice that the sharp edges are facing the direction opposite the chainsaw body or motor.
How do you remove a chain without a master link?
If you have a standard chain with no master link: Seat the chain in the chain tool, with the pin of the chain tool aligned with a pin in the chain. Turn the handle of the chain tool until you push the pin out far enough that you can break the chain.
Why does my chain keep popping off my chain saw?
Chainsaw chains come off the bar due to worn-out bars, worn-out sprockets, and wrongly set tension. You should also note that with continued use, chains lose their tension and hence are more likely to come off the bar when you least expect it.
How to put a chain back on a Husqvarna chainsaw?
Removal of the chainsaw sprocket cover. Take a 13 mm pipe wrench .
How to change a Husqvarna chainsaw blade?
Remove the trimmer head by placing the locking pin in the small head on the back of the gear head.
What is the warranty on a Husqvarna chainsaw?
Warranty periods differ for model and usage and also based on date of purchase. The current warranty guidelines are any Husqvarna branded chainsaw purchased after 01 February 2010 that is not an XP or Top handle saw has a 2 year consumer warranty, or 90 days for commercial use.
How do you replace a chain on a chainsaw?
If You’ve Reached the “Safety Lines” on the Chain As mentioned above,there are small lines stamped into chainsaw cutter and guides,which indicate how far it can be