How do I reset my Z-wave Schlage connect?

Table of Contents

How do I reset my Z-wave Schlage connect?

Complete the following steps to factory default your Schlage Z-Wave Lock:

Remove the battery cover. Remove the battery cover from the front of the lock.
Cut device power. Remove the battery from the device.
Perform the reset. Press and hold the Schlage button on the front of the lock.
Confirm the reset.

Does Schlage Z-Wave need a hub?

To make this all work, you’ll just need a Wink Hub or Wink Hub 2, Wi-Fi connection and an iOS or Android smartphone device.

How do I set up my Schlage connect?

To pair your Schlage Connect Smart Deadbolt with Samsung SmartThings, open the SmartThings app on your mobile device and tap on Home. Under Things, choose Add a Thing and follow the directions in the app. At the end of enrollment, a green light on your lock indicates success.

How do you put a Schlage lock in pairing mode?

How do I pair my Schlage Smart lock?

To sync your Schlage Connect Smart Deadbolt with Z-Wave Plus to your Wink hub, open the Wink app on your mobile device and follow the app’s instructions. When you have successfully connected your devices, you will see a flashing green check mark on the lock. The Wink app will also indicate that it has found the lock.

How do I connect my Schlage lock to WiFi?

It’s easy to set up – plug it in within Bluetooth range of the lock (usually about 40 feet), and use the Schlage Sense app to connect the Adapter to your home Wi-Fi network. Then pair it with your lock.

How do I pair my Schlage Smart Lock?

How do I pair my Schlage smart lock with a new smart device?

It’s easy to set up – plug it in within Bluetooth range of the lock (usually about 40 feet), and use the Schlage® Home app to connect the Adapter to your home Wi-Fi network. Then pair it with your lock.

Why won’t my Schlage lock connect to my WiFi?

Check if the adapter is correctly connected to your WiFi network and placed close to your router. Ensure that your network’s bandwidth is 2.4 GHz and that your mobile data is switched off. Reset your adapter by pressing and holding the reset button on the device for 10 seconds.

How do I connect Schlage Z-Wave to SmartThings?

Steps taken:

Open SmartThings app.
Click SmartThings Hub.
Click 3-buttons on the top right corner (on Android phones).
Select z-wave utilities.
Select z-wave exclusion # this option will clear memory on z-wave devices.
press 6 program digits + 0.
pairing, click add device ==> schlage ==> door locks.

How do you put Schlage sense in pairing mode?

Navigate to the menu in the app and click Wi-Fi Adapters. 2Click the “+” in the top right corner of the page. 3Take note of the 8-digit programming code located on the back of your Wi-Fi Adapter – you’ll need it for setup. 4Plug in your Wi-Fi Adapter within 40 feet of your Schlage Sense Smart Deadbolt.

How do you put Schlage Sense in pairing mode?

Which Z-Wave based home automation systems work with Schlage connect?

The Schlage Connect Smart Deadbolt with Z-Wave Plus technology was built to be incorporated into the leading Z-Wave based home automation systems. Scroll down for the full list of systems that can seamlessly connect to your smart lock. Use Amazon Alexa to control your lock with your voice.

What is Schlage Z Wave Plus?

Z-WAVE PLUS The Schlage Connect™ Smart Deadbolt combines advanced features with the enhanced security of Z-Wave Plus. It’s easier than ever to connect to your home automation system and control your lock with your voice. Free yourself from the hassles of lost keys, getting locked out, or having to hide away spare keys.

How do I enroll a Z-Wave device to a Schlage Lock?

Put the Z-Wave hub or controller into its Z-Wave inclusion mode. Again, you should check the manual for the device for information on how to do this. Once the system is in its pairing mode, activate the enrollment function on the Schlage Lock.