How do I update my Polycom Soundstation IP 6000 firmware?

Posted on by David Darling

How do I update my Polycom Soundstation IP 6000 firmware?

Manual Firmware Upgrade

  1. Press the Menu Key and select Status.
  2. Select Network.
  3. Select TCP/IP Parameters.
  4. Select Network Config.
  5. Jot down the IP address following IP:
  6. Open up a web browser on your PC and enter the IP address following https://
  7. Enter the device password.
  8. In the Utilities menu, select Software Upgrade.

How do I reset my Polycom Soundstation IP 7000?

To restore phone to factory defaults with the Admin Password:

  1. Power cycle the phone.
  2. Press Cancel soft key during the boot process.
  3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears:
  4. Enter the administrator password to initiate the reset.
  5. Press OK.

How do I update the firmware on my Polycom phone?

Go to “Utilities” >> “Software Upgrade”.

  1. Select “Poly Hosted Server” and then click on “Check for Updates”.
  2. Go to the Supported Firmwares page, find the firmware version for your device, then select it from the drop-down menu.
  3. Click on “Install”.
  4. The phone reboots to install the required firmware.

How do I update poly?

To Manually Update Software on a Poly VideoOS Device​

  1. Enter the IP address of the device in a web browser to open the System Web Interface.
  2. Go to General Settings > Device Management.
  3. Select Check for Updates.
  4. The system will find a software version for the device.
  5. Select Update All.

How do I download Polycom firmware?

How do I update firmware on Polycom studio?

Procedure

  1. Connect the Poly Studio USB device to your computer, then select the Poly Studio USB video bar tile in Polycom Companion.
  2. Select the Firmware Update tab.
  3. Select Update from Local File and choose the software build you want to use.

How do you use a Polycom SoundStation?

Polycom SoundStation2: Conference a Call

  1. Start a call with Polycom SoundStation2.
  2. Press the Conference button . Places the first call on hold.
  3. Dial the number and connect with the second party.
  4. Press the Conference button. This will merge the three calls.

How do I update firmware on my poly headset?

You can update the firmware on your headset (if applicable) by downloading the corresponding app to your mobile phone. Access the “Settings” menu and tap the “Firmware Update” option. your headset needs to be in range and connected, and your headset battery to at least 50%.

How do I update firmware on poly studio?

How do I check my Polycom firmware version?

To find out the current firmware version running on your Polycom phone:

  1. On the Polycom phone press the Menu Button.
  2. Scroll to the Status… menu item and press Select.
  3. Scroll to the Platform…
  4. Scroll to the Application…
  5. Scroll to the Main…
  6. You should see your firmware version on the screen similar to: Version: 3.1.2.0392.

How do I update my Polycom camera?

Plug in the Polycom EagleEye IV USB camera power cable to power on and allow the camera system to fully boot up. Plug the USB drive into the Polycom EagleEye IV USB camera system. The Polycom EagleEye IV USB camera system starts the image update and the LED blinks amber.

Is Polycom SoundStation 2 an IP phone?

Re: SoundStation 2 and VOIP phone lines The SoundStation 2 is an analog phone and will only work with an analog phone line. The AUX port on the Interface Module can be utilized to connect to an external Speaker System and is only an output.

How do you set up a Polycom phone?

Connect Your Polycom Phone

  1. Locate the LAN and PC ethernet ports on the bottom of the phone.
  2. Connect the ethernet cable for your network into the LAN port.
  3. Connect an ethernet cable from your computer or laptop dock/port replicator to PC port, if applicable.
  4. Complete the setup process:

How do I set up my Polycom SoundStation IP 7000 phone?

Setup Guide for the Polycom SoundStation IP 7000 Phone 1 – 6 The following figure shows how to connect your phone to an AC power source and the Multi-Interface Module. To connect your phone to an AC power source and the Multi-Interface Module: 1. Connect the 3.6m (12ft) Network Cable (10-pin) to the LAN jack on your phone. 2.

What has replaced the SoundStation IP 7000?

The SoundStation IP 7000 has been replaced by the Poly Trio 8800 and Trio 8500. Combined download should be used where phones may be running pre-4.0 BootROM

Can I connect my phone to a Polycom HDX system?

You can connect your phone to a Polycom HDX system or Polycom RealPresence Group system so that your phone can conduct video calls and conferences. You can connect your phone to the following Polycom HDX systems:

Can I connect more than one Polycom microphone to my phone?

NoteYou can only attach one analog expansion microphone directly to your phone when your phone is connected to a Polycom HDX system or Polycom RealPresence Group system. You can only daisy-chain up to two Polycom Microphone Arrays directly to your phone when your phone is connected to a Polycom HDX system or Polycom RealPresence Group system.