How do I reset my Vera edge?

Posted on by David Darling

How do I reset my Vera edge?

The Vera Edge controllers can be reset to factory defaults by holding the reset button for 20 seconds and releasing it. This will reset the Z-Wave network and change it’s House ID, and clear your account and user configuration data from your controller.

How do you reset a Vera light?

Hardware reset via Reset button

  1. Vera Lite – UI7. For UI7 you’ll need to hold for 5-10 seconds the Reset button to reset the network settings, and over 20 seconds to reset it to factory defaults, this will clear the account from the unit as well.
  2. Vera Edge.
  3. Vera Plus.

Why is my Vera controller offline?

To fix the problem: Make sure that the internet cable is connected to an internet source and/or try a different ethernet patch cord. Also, if your Vera controller is connected to the router via a switch (a network distribution box), try connecting the controller directly to the router. Also, try resetting the router.

How do I set up Vera Plus?

Firmly connect the provided Ethernet Cable from your VeraPlus to your Wi-Fi router (or other Internet source). Firmly connect the AC Power Adapter to VeraPlus and plug it into an AC outlet. VeraPlus has no on/off switch. It will power up as soon as you plug in the AC adapter.

How do you set up a Vera light?

Installation

  1. Plug the Vera Lite into your mains supply and connect it with an Ethernet cable to the internet via router or home network.
  2. Simply switch on the Vera Lite and wait about 2 minutes until the LEDs at the front light up continuously.
  3. Select the tab “Support” and then click on “Setup” and chose “VeraLite”.

How do I reset my Nissan Versa controller?

Locate the Reset button on the Base Station. Tap the reset button 2 times. Press and hold the reset button for 10 seconds. Allow 10-15 seconds for the factory reset to complete.

How do I connect my Vera controller to my WIFI?

  1. Open your Vera UI7 Dashboard.
  2. Open the Settings tab on the left menu.
  3. Press Net & Wifi.
  4. Select “Through a Wi-Fi access point”
  5. Press “Scan and connect to a wifi network”
  6. Wait for the nearby hotspots to appear on the list.
  7. Type in your passphrase and press “Connect”

How do I find my Vera IP address?

To find its local IP Address you can check your Internet routers’ DHCP lease table (this could be called “machines” or “stations” on your Internet routers’ user interface) and search for the IP assigned to the VERA Edges’ MAC Address – this can be found on a label on the bottom of your VERA Edge Controller.

Can Vera control WIFI devices?

“Yes” is the quick answer and “it depends” is the more accurate answer. Keep in mind that Vera uses up to four wireless communication systems: Z-Wave for most non-camera devices, Wi-Fi for wireless cameras, Zigbee for added versatility, and VeraLink for Nortek’s 2GIG Radio Frequency devices.

How do I reset my Ecotech versa?

How do I connect to Vera WIFI?

Does ring work with Vera?

You cannot get ring in Vera.

Does Nest work with Vera?

This plugin will monitor and control your Nest thermostat(s) and/or Protect smoke/CO detector(s) through your Vera home automation gateway.

How do I add a device to Vera edge?

Adding device

  1. Go to the Devices section.
  2. Click Add Device.
  3. Choose a Generic Z-wave device from the list.
  4. Click Next.
  5. Click Next.
  6. Follow the inclusion process as described in the users manual.
  7. Enter the name of the added device and choose a room it will be placed in.

How do I calibrate my Ecotech versa?

Steps:

  1. Power on all Mobius devices.
  2. Open the Mobius app.
  3. Select the tank containing your Versa(s)
  4. Under the Dose tab select Dose Settings.
  5. Select Calibrate.

What is versa director?

Versa Director is Versa Networks’ virtualization and service creation platform that simplifies the creation, automation and delivery of services using Versa WAN edge software, FlexVNF.

What is versa device?

Versa is the modern secure network. Available via the cloud, on-premises, or as a blended combination of both, Versa SASE connects Enterprise branches, teleworkers, and end users securely and reliably to applications in the cloud or data centers around the world. Learn More.

What is the Vera hub used for?

The Vera hub is a controller mainly for connecting to Z-Wave devices. The supported Vera hubs (Edge, Plus and Secure) are no longer available and the firmware is not being actively enhanced by the vendor. New Z-Wave devices are not directly supported and so are not easy to add to the platform.

How do I reset your veraedge controller to default settings?

Your VeraEdge controller has three buttons on the side which can be used to reset the unit, include or exclude Z-Wave devices, and pair networked devices over WPS. The reset button requires a pin or paperclip to be pressed.

How do I set up Vera integration?

In the sidebar click on Configuration. From the configuration menu select: Integrations. In the bottom right, click on the Add Integration button. From the list, search and select “Vera”. Follow the instruction on screen to complete the set up.

How do I use the WPS button on my veraedge controller?

The WPS button is used to connect networked devices to your VeraEdge controller. Push the button to activate WPS pairing functionality; it will time-out after 1 minute The Sync button is used to start the selection mode between the available radios. It has two operating modes: