Who makes Expobar espresso machines?
Crem International. Facebook photo. Florida-based foodservice equipment seller Welbilt is acquiring Swedish espresso equipment provider Crem International — owner of the Coffee Queen and Expobar brands — for approximately $224 million USD.
Why is my espresso machine not getting to pressure?
The most common causes for an espresso machine not building enough pressure have to do with the coffee. Too coarse a grind, too little coffee, or insufficiently tamping the grounds before brewing can all lead to inadequate pressure for a proper brew.
Why is my espresso pressure low?
If your brew pressure looks low, your shots are likely flowing too quickly (this will lead to a variety of off flavors). So break your eyes away from the brew pressure gauge and get out your stop watch (many espresso machines have shot timers built in or available to install) and scale.
Is Expobar a good brand?
Is Expobar a good brand? If you’re looking for a quality espresso machine, then you may be wondering if Expobar is a good brand. The answer is yes! Expobar makes some of the best espresso machines on the market, and they’re a great choice for anyone who wants to make delicious espresso at home.
Are Expobar coffee machines good?
Expobar coffee machines are reliable and well built (in Spain). They don’t have a highly polished finish like most of the Italian commercial machines such as the 2 group Lelit Giulietta and the German prosumer brands such as Profitec but they do represent good value for money.
How often should you descale espresso machine?
If you office is based in a hard-water area and use your espresso machine up to 6 times per day then we suggest descaling your espresso machine every three weeks or monthly to avoid scale build-up. If however, you are based in a soft-water area then it is recommended to descale it every 3 to 4 months.
How often should you backflush a coffee machine?
every 2 to 4 weeks
This process cleans the group head of rancid coffee oils and should be carried out every 2 to 4 weeks on a machine which is used daily at home.
How do you clean Expobar?
Lock the portafilter back into the group head. Activate the auto-cleaning cycle as follows: Switch off the machine, then press & hold the 2 ristretto (2 short coffees or 3rd button) on the touch pad, turn the machine back on. Release the button; auto cleaning is engaged and will run through 5 times before disengaging.
What symptoms can you diagnose as potential faults in espresso machines?
Common Problems With Coffee Machines
- Your coffee machine does not work at all.
- Absence of water or coffee from the group head.
- When the steam arm does not work.
- When there is no hot water.
- When there are leakages.
- When the coffee tastes awful.
- When the coffee turns cold.
- When coffee grounds in a cup.
Is Expobar a good coffee machine?
Where are Wega coffee machines made?
Italy
Manufactured in Italy, the home of espresso, grinders and machine makers, Wega café coffee machines and Mazzer grinders offer high quality and exceptional performance.
Why does a rotary coffee maker need 9 bars of pressure?
It allows this water to saturate the coffee and get the grounds equally wet. This can make the coffee extract more smoothly. Water will always take the path of least resistance. By letting the water saturate the grinds before brewing at 9 bars of pressure, this can help prevent channeling. My rotary pump is really loud! 1.
Why is the gasket on my expobar not working?
Newer machines of any model Expobar will use an 8.5 mm gasket. If it does not seem to fit, there is a possible obstructions, coffee, etc, preventing it from sitting all the way in to the group head. Try a thorough cleaning if the 8.5 mm doesn’t seem to fit. 2. Is the leak coming from the lever arm of the machine?
How to clean or replace the vacuum relief valve on expobar espresso machines?
Take apart the vacuum breaker and inspect the components, clean all components and remove any buildup or small pieces of debris. Make sure the small o-ring is not broken or too dried out. How To Clean or Replace the Vacuum Relief Valve on Expobar Espresso Machines
How do I replace the pressurestat on my expobar?
To replace the pressurestat on your Expobar, you will need to remove the housing and locate the stat. The installation is quite simple and will only require a few tools. Housing removal has not been included in this instructional as it may vary from machine to machine. Yes.