How much does a wood bar top cost?
Wood countertop prices range from $20 to $70 per square foot on average. At that price, you can expect to pay $1,000 to $3,500 for the average kitchen with 50 square feet of countertop space. Custom and designer butcher blocks cost $130 to $200 per square foot.
What kind of wood should I use for a bar top?
Oak is strong, stiff and resistant to warping. It’s a good choice for outdoor bars. Reclaimed oak is usually easy to find, making it the best wood for bar tops if you have a large project. Wood bar tops can be pale honey-colored, classic dark brown or dramatic golden brown.
How much is a bar countertop?
Cost Home Advisor lists solid surface countertops at $52 – $120 as the total materials + install price. This is the mid-price choice is our list of bar countertops and can be a great upgrade from laminate if you can swing it.
How thick should a wood bar top be?
1 3/4-inches
The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood. Increased thicknesses are available using a built-up assembly or other construction styles, such as edge grain. The front overhang for the patron side of the bar is typically 6- to 12-inches if you intend to have bar stools.
How thick should plywood be for bar top?
The most common is to use 5/8-inch plywood or the standard 3/4-inch plywood and then stack the wood on top of that to the desired finish height, depending on the type of wood used for the counter top, such as with butcher-block wood.
How deep is a bar countertop?
Not Too Deep It should be large enough to fit a sink and fixtures but not so deep you can’t reach to the back. Typically a bar top that is a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches to allow more space for larger sinks and fixtures.
What is an inexpensive countertop?
Laminate Countertops Generally the most affordable countertop material available, laminate is made from layers of plastic bonded to particleboard to form a solid surface.
How much overhang should a bar top have?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
Can I use plywood for bar top?
When making a home or commercial bar top we always recommend using ¾” thick solid hardwood for the main bar top as it is more durable and longer lasting than a plywood top and can even be refinished. At Hardwoods Incorporated we make and sell solid hardwood bar top kits in a variety of wood species.
What can I use for a bar top?
What are the Best Bar Top Materials?
- Laminate. Laminate is an affordable material that is easy to care for and available in a wide range of colors and styles.
- Granite. If you are looking for something high-end, granite is a great option.
- Solid Surface.
- Marble.
- Wood.
What is the standard overhang for a bar top?
Are wood countertops more expensive than granite?
Purchasing and maintaining granite is costly. It is a more expensive countertop material. Furthermore, because it is much heavier than wood, the installation is more labor intensive, which may raise the price.