What is a flange spreader tool?
Safe and easy to use, the FlangeBoss spreads flanges evenly and safely during gasket changes and pancake blind installations. Flange Boss flange spreaders actuate mechanically, pneumatically or hydraulically.
What is spreader tool?
A spreader is a hydraulic tool that is designed with two arms that come together in a narrow tip, and that uses hydraulic pressure to separate or spread the arms.
What device is normally used to break apart flanges?
Flange spreading tools – (sometimes referred to as flange splitters or flange separators), are a useful addition to the on-site engineer’s arsenal of flange maintenance tools.
What are banana wedges used for?
These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges. When used with a tether (not included), wedges with a tether hole help keep tools close and prevent them from accidentally falling.
What is a pipe spreader?
Used in both vertical and horizontal positions, a pipe spreader is placed at both ends of a 1 1/4″ diameter pipe. The two piece system is simply one receptacle for the pipe with a padded flat plate welded to it to protect the wall or ceiling, and another receptable for telescoping to ensure a tight fit.
What is the function of spreader?
A cell spreader or plate spreader is a manual tool used in biology and related fields to gently spread cells and bacteria on a culture plate, such as a Petri dish.
What is the role of spreader?
Spreaders, often known as cell spreaders, are tools used in the laboratory that allow for samples to be smoothly spread onto a petri-dish or plate.
Is dn the same as NPT?
It is common to identify pipes by inches using NPS or “Nominal Pipe Size“. NPS is often incorrectly called National Pipe Size, due to confusion with national pipe thread (NPT). The metric equivalent is called DN or “diametre nominel“.
What are flange wedges used for?
These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.
What are banana wedges?
H & M ‘s Banana Wedges (Part # BWEDGE) are made of forged Carbon Steel for durability and designed to facilitate the separation of pipe flanges. Two opposing wedges are driven together, forcing flanges to separate (see photo B)
What’s another word for spreader?
Spreader synonyms In this page you can discover 4 synonyms, antonyms, idiomatic expressions, and related words for spreader, like: broadcaster, applicator, heavy-duty and long-handled.
What is a load spreader?
Material used to distribute the weight of a load over a given area to avoid exceeding designed stress. Dictionary of Military and Associated Terms.
What is glass spreader?
Glass spreaders are shaped glass rods used for spreading bacteria onto worm plates during the chunking worms protocol.
Gearench PETOL™ POP-IT™ Tool Flange Spreader is a versatile mechanical spreading, lifting, prying tool available in either 10,000 lb or 30,000 lb spreading force models. Equalizer Flange Spreader Wedges for spreading applications with a minimum 6.0 mm gap providing up to 25T spreading force.
How much spreading force can a flange spreader wedge produce?
Equalizer Flange Spreader Wedges for spreading applications with a minimum 6.0 mm gap providing up to 25T spreading force. Available in mechanical, hydraulic, or integral hydraulic configurations.
How do you spread a flange joint?
When spreading a flange joint, it is recommended to use two tools set 180 degrees apart on the joint. When doing this you improve safety and have also more spreading force. You can also spread more evenly and this ensures that the flange gasket will not be damaged.
Will the festec flange spreader fit in my toolbox?
The Festec ® Flange Spreader will fit in every toolbox due to its handy size and low weight. It is not much larger than a studbolt and requires mostly the same heavy duty spanner as used on the nuts of the studbolts in the flange joint to be separated.