How do you hook up a hand held shower to a tub spout?
A handheld shower head also can be installed onto a tub spout that has a special diverter fitting….Usually, this requires replacing the old tub spout with a new one that has a diverter fitting.
- Remove the Tub Spout. First, remove the old tub spout.
- Install a New Spout.
- Mount the Slide Bar.
- Attach the Flexible Hose.
What is the difference between a diverter and non diverter tub spout?
Diverter or Non-Diverter A diverter tub spout will have a lift rod that you pull up and push down on to divert the water between the showerhead and tub spout. A non-diverter tub spout will not have a lift rod (generally, used in a tub only or a three handle tub and shower configuration).
What is a slip fit tub spout connection?
A slip-fit spout has an internal assembly that slips over a copper pipe. The spout has an opening on the bottom side where a setscrew is tightened to hold the spout onto the copper pipe. A slip-fit spout does not contain threads.
Can you put a tub spout in a shower?
Most tub and shower combination faucets can be installed in a shower without using the tub spout. If you do not wish to use the tub function, you can plug the outlet for the tub spout on the valve and not install the spout on the tub wall.
What type of tub spout do I have?
How To Determine What Type of Tub Spout You Already Have. Grab a flashlight and look beneath the tub spout while it still attached to the wall. If you can see a tiny screw on the underside of the spout, you have a slip-on tub spout with a set screw. If there is no set screw, you have a threaded tub spout.
Do I need a diverter on my tub spout?
If you have a shower-tub combination in your bathroom, the shower diverter valve is what allows you to divert the water back and forth between the tub faucet and the showerhead. Though they are typically very simple devices, shower diverters may malfunction and need replacing once in a while.
Can you replace a threaded tub spout with a slip-on?
Replacing a slip-on spout is easy: Just loosen the setscrew (usually with a hex wrench) and pull the spout off the copper pipe that protrudes from the wall. Twist the spout as you pull and be gentle so you don’t loosen any pipe connections inside the wall. Then slide on the new spout and tighten the setscrew.
How do I know if my tub spout is slip fit?
Grab a flashlight and look beneath the tub spout while it still attached to the wall. If you can see a tiny screw on the underside of the spout, you have a slip-on tub spout with a set screw. If there is no set screw, you have a threaded tub spout.
How do you turn a bathtub faucet into a shower?
The quickest and most basic way to add a shower is a slip-on attachment. These can be used with any type of tub, and feature plastic or rubber connectors that fit over your existing spout, redirecting water through an attached hose to a handshower; nothing gets opened up or removed.