What are the parts of a handrail?
Parts of a Railing System
- Baluster. A baluster is a short and decorative post, pillar, or column in a series that supports the top rail.
- Balustrade. A balustrade is a railing supported by a series of balusters.
- Bottom Rail.
- Guardrail.
- Hinge.
- Landing.
- Lattice.
- Newel Posts.
What is the minimum clearance space between a handrail and a wall?
2-1/4″
Originally created as part of their building code — NFPA 5000 — but now included in NFPA 101 — Life Safety Code, the NFPA requires a 2-1/4″ clearance between the wall and the handrail.
What are the parts of a stair railing called?
Balustrade. The collective name for the parts on a complete staircase, i.e. handrail, base rail, spindles, newel posts etc. Balustrade parts are available in wood, glass and metal.
What are the parts of a staircase banister?
A handrail, also called a bannister, is what people hold onto for support when going up and down the staircase. The handrail is fixed to vertical posts (balusters) or a wall up one or both sides of the staircase.
What are the slats in a railing called?
In furniture construction it is known as a spindle. Common materials used in its construction are wood, stone, and less frequently metal and ceramic. A group of balusters supporting a handrail, coping, or ornamental detail are known as a balustrade.
What are the spindles on a railing called?
Balusters are the closely spaced supports used to hold up a waist-high handrail, safely containing people inside a staircase or patio deck. They are practical and decorative, providing style and support to the rail system. Balusters are attached to either the floor or secondary support called a base rail.
What are the basic components of a stairway?
There are three main components to design when building a staircase – the treads, risers, and stringers.
What is the difference between a railing and a banister?
A banister is the definition of extended support that runs alongside staircases. Banisters are interchangeable with handrails in a definition sense. Meanwhile, a stair railing is what is there to prevent you from falling off the stairs.
What type of cladding do I need for my wall?
Although greatly dependent on your wall structure, timber cladding is normally fitted over a drained and ventilated cavity. A breather layer separates dry and wet zones, although a breather membrane is not essential for cladding fixed to a masonry building with cavity walls. Horizontal cladding is typically fixed to vertical battens.
What are the different types of timber cladding?
The boards are nailed to vertical battens on the substrate – this could be masonry, timber frame etc. Vertical timber cladding can come in the form of tongue and groove, or board on board, along with open joint options too. Generally vertical timber cladding will require counter battens to enable moisture run off in the cavity.
What is Hor horizontal cladding?
Horizontal cladding boards are fixed to vertical battens which allow free draining down the cavity and air circulation. Vertical boards are fixed to horizontal battens which in turn are fixed to vertical battens to allow for free drainage and air circulation. The following images provide examples of timber cladding details.
What is the overall visual quality of timber cladding?
The overall visual quality of timber cladding will be very dependent on the details relating it to building configuration such as corners, changes of level, parapets, openings, junctions with other materials etc.