What is the use of PacketShaper?
PacketShaper lets you measure network application performance, categorize and manage web traffic based on its content, guarantee quality-of-service (QoS) for preferred applications and content, and contain the impact of undesirable traffic. Critical applications need to move at the speed of business.
How do I reset my bluecoat PacketShaper?
setup reset all
- Open a web browser and login to the PacketShaper.
- Choose the Advanced UI on the top-right corner of the page.
- Click on the Setup tab.
- From the Choose Setup Page drop down list, select Unit Resets.
- Click on the Reset all button to reset the PacketShaper configuration to the factory-default state.
What are the different PacketShaper CLI views?
There are two predefined 142 PacketShaper CLI Commands views; isoAll and isoNone. The isoAll view gives a group access to all MIB information, and the isoNone view blocks all access. If you want your SNMP groups to have either complete access or no access to all MIB information, your groups only need to use the built-in isoAll or isoNone views.
How do I specify the in PacketShaper?
The can be specified in any of the following ways: 38 PacketShaper CLI Commands Type of Example Host IP address 192.168.1.10 Range of IP addresses 192.168.1.100192.168.1.200 Use a dash — with no spaces — between the low and high address in the range.
Is the PacketShaper CLI service name case sensitive?
The service name is case sensitive. 28 PacketShaper CLI Commands signature The signature can be specified in hexadecimal format or as a quoted string. The string can be up to 30 characters long, is case sensitive, and must be enclosed in quotation marks.
How do I download a packet from PacketShaper?
Use the packetcapture status command to determine the filename to download. 76 PacketShaper CLI Commands packetcapture on Enable packet capture. After capture is turned on, PacketShaper will create a .dmp file in TCPDump format and start capturing packets into this file.