What is the difference between NV3500 and NV4500 transmission?
Nv3500 can handle any SB and highway and moderate towing. NV4500 is a great trans, but as stated, it is a tow truck box 3500 is slick by comparison. Drive each one and see what feels best. A GM 4X4 V8 NV3500 has larger output shaft that is same as NV4500 so T-cases can be interchanged.
How much does an NV3500 transmission weigh?
At approximately 110 lbs, the NV3500 is relatively lightweight. A more robust version of the transmission, the NV3500-HD, was used exclusively in the Dodge Dakota midsize pickup from 1994 to 2004 model years; it features a slightly higher input torque rating.
What did the NV3500 transmission come in?
The fully synchronized NV3500 manual transmission was first available to Dodge buyers in the 1994 Dodge Rams and Dakotas, as a replacement for the NV4500; it had an two-piece, aluminum-casting, split-case design that weighed less and had less noise than cast iron.
Are Dodge and Chevy NV3500 the same?
The New Venture Gear 3500, commonly called NV3500, is a 5-speed overdrive manual transmission manufactured by New Venture Gear and used by GM and Dodge in compact and full-size light trucks. It can be identified by its two-piece aluminum case with integrated bell housing and top-mounted tower shifter.
Can I replace a nv3500 with a NV4500?
The 3500 has an integrated bell housing, so the 4500 will have to be purchased with its own. Both use the same clutch and flywheel config. U can use the same clutch and master cylinder u have for the new 4500. Both bolt up to the np241 IF the spline count is the same.
What years did Chevy use the NV4500?
The NV4500 was first released in Chevy / GM trucks from 1992 under GM RPO code MT8 and GM part #12346190. It was introduced into Dodge trucks in 1995. Though it has it roots as the New Process 4500 four-speed beginning as early as 1972 in Dodge trucks, its current incarnation as we know it today is quite different.
How long is a T56 transmission?
T5, T10, T56, A-833, Toploader Transmission Measurements
| Model | A | B |
|---|---|---|
| GM T56, F-car (production) | 4.9 in. | 21 in. |
| GM T56, F-car (aftermarket)** | 6.3 in. | 21.5 in. |
| Ford T5 | 6.9375 in. | 14.5 in. |
| Ford Toploader | 6.375 in. | 13.25 in. |
How much does it cost to rebuild a NV3500?
Remanufactured NV3500 Transmission Price
| Price | Core | Upfront Cost |
|---|---|---|
| $2175 | Waived* | $2175 |
What did the NV3550 transmission come in?
The NV3550 was the transmission that superceded the AX15. It comes in Jeeps 2000-2005 with a 4.0L engine. IT is generally considered a significantly better tranny than the quite decent AX15.
How do I know if I have a NV4500?
- TRANSMISSION IDENTIFICATION. The NV4500 transmission identification tag is attached to the shifter top cover.
- GM 4WD NV4500 (1993-94) During the first two years of the NV4500, Chevy offered this 5 speed with a 6.34:1.
- GM 4WD NV4500 (1995)
- GM 4WD NV4500 (1996 & Newer)
What GM vehicles have a NV4500 transmission?
Engine Compatibility and Adaptability The NV4500 is found in GMC & Dodge trucks. The bellhousing pattern for 1993-1994 GM versions is unique from the later (1995-) GM and Dodge units. The 1993 and 1994 Chevy versions have a lower first gear of 6.34:1 and an unsynchronized reverse gear.
What is the difference between NV4500 and NV4500HD?
NV4500LD: Used in GM gas and diesel applications, and Dodge V8 gas applications. NV4500HD: Used in Dodge light duty trucks with the Cummins Turbo Diesel, and the V10 Magnum gas engine.
How tall is a T56 transmission?
How long is a th350 transmission?
TH-350
| Style | A | C |
|---|---|---|
| 6 in. Tailshaft | 27 11/16 in. | 20 3/8 in. |
| 9 in. Tailshaft | 30 11/16 in. | |
| 12 in. Tailshaft | 33 27/32 in. |
How many hours does it take to replace a transmission?
It usually only takes a day or two to replace a transmission in most rear wheel vehicles. However, some late-model, front-wheel drive vehicles can be quite labor-intensive and take three to four days.
How much power can a NV3550 handle?
NV3550: General Information: All five gears are fully synchronized and shift very smoothly and easily. This unit is conservatively rated by New Venture Gear at 300 ft/lbs torque handling capacity.
Can an AX15 handle a v8?
The AX15 transmission has always been a great transmission able to handle the torque and horsepower of most V8s.
What oil does a NV3500 take?
Castrol – EDGE® 5W-30 Full Synthetic Motor Oil 5 Quart (Part No. 1598B1)
What kind of transmission does a NV3500 have?
The New Venture Gear 3500, commonly called NV3500, is a 5-speed overdrive manual transmission manufactured by New Venture Gear and used by GM and Dodge in compact and full-size light trucks.
What does The NV3500 mean on a GMC Sierra?
Within the confines of General Motors transmissions, the NV3500 is known as the M50 transmission. If you made your way here because you were trying to figure out what this code meant, you can rest assured your truck was equipped from the factory with an NV3500. The NV3500 stands for New Venture Gear 3500. It is a 5 speed manual transmission.
What kind of transmission is a 3500 new venture?
New Venture Gear 3500 transmission. The New Venture Gear 3500, commonly called NV3500, is a 5-speed overdrive manual transmission manufactured by New Venture Gear and used by GM and Dodge in compact and full-size light trucks.
What type of brake fluid does The NV3500 use?
The clutch master cylinder used DOT 3 brake fluid. The NV3500’s slave cylinder assembly was on the outside of the front case. The NV3500’s flywheel and pressure plate had machined smooth surfaces facing the transmission and engine, respectively, since it made contact with the clutch disc friction material.