Is Homasote a good sound barrier?
In combination with conventional partition and floor systems, Homasote sound control products will reduce transmission of airborne and impact sounds. Lightweight, free of voids or splinters, and easy to work with and cut, Homasote products are moisture-resistant and protected against termites, rot and fungi.
Is Homasote board waterproof?
440 Homasote is used in dozens of artful ways by crafts people and hobbyists. It is lightweight, easy to cut with a mat knife or saw, has no splinters, and makes an excellent tackable surface. It’s waterproof and can be used inside and out. Just use your imagination!
What is the STC rating of Homasote?
Homasote assemblies achieve STC ratings as high as 66.
What can I use instead of a Homasote board?
Rigid Foam Insulation Board A very lightweight solution for smaller projects. This would be a good alternative if you can’t find homasote.
Did Homasote contain asbestos?
Homasote Company is the nation’s oldest manufacturer of building products from recycled material, fiberboard products made from post-consumer recycled paper, containing no asbestos or formaldehyde additives.
How strong is homasote?
An Astounding Testament To The Strength of 440 SoundBarrier | Homasote.
Is Homasote safe?
Homasote products are non-toxic, wax emulsified for moisture- and mold-resistance and integrally protected against termites and fungi, ensuring a healthy environment.
How do I install Homasote 440?
Homasote installed to wood sub-floor. 1) Cut panels into 4′ x 4’s; leaving 3/16” gaps between adjoining panels and 3/8” from walls and partitions. Install Homasote panels to wood sub-floor. Use an APA-approved adhesive with annular- threaded (ring shank) nails or screws to secure Homasote panels to wood sub-floor.
Is homasote safe?
How do you fasten a Homasote board?
use with Laminate/Engineered or Floating Floor Place a fastener in each corner, holding back 3/4” from panel edge; place one fastener in middle of panel. Allow for 3/16” expansion gap between all Homasote panels. 3) Install laminate or floating floor in strict accordance with flooring manufacturer’s instructions.
How do you cut Homasote panels?
All Homasote products may be cut with a circular saw, jig saw or hand saw. Do not use a fine-tooth blade; fiber build-up will reduce cutting efficiencies. The half-inch panels may also be cut with a razor or utility knife.
What is Homasote 440 soundbarrier®?
Structural Homasote®440 SoundBarrier®is engineered to control sound in UL®-listed floor and wall assemblies (ICC-ES ESR-1374) Industry awareness of the need for sound control in multi-family residential and commercial construction is growing due to stricter building code requirements.
What is 440 soundbarrier made of?
Homasote® 440 SoundBarrier® is a special-density, structural board made from 98% environmental Homasote® cellulose fiber. It also insulates, with twice the R-value of wood and made with FSC® certified material.
Can I use 440 soundbarrier® with shelving and flat screen TVs?
Homasote walls will not lose STC rating with shelving and flat-screen TVs. Combined with – or added to – conventional partition and floor systems, 440 SoundBarrier® will reduce transmission of airborne and impact sounds.
Does the 440 soundbarrier reduce energy costs?
440 SoundBarrier does reduce energy costs! What else, besides post-consumer paper, is used in manufacturing Homasote®? To find out click here. Water absorption by volume (max.):