Who makes Clow Valves?
McWane family
Clow Valve is proud to be a part of the McWane family of companies.
Who owns Clow pipe?
In a move that unites them under one, iron-strong brand, the McWane Cast Iron Pipe Co., Pacific States Cast Iron Pipe Co., Atlantic States Cast Iron Pipe Co., and Clow Water Systems will consolidate under the new name McWane Ductile.
Where are fire hydrants made in Iowa?
Eddy Iowa – Oskaloosa, IA The Oskaloosa, IA plant of Clow Valve continued producing the same Iowa hydrant under the manufacturer’s name of Eddy Iowa into the late 1970s at which time the production of venerable Iowa hydrant ceased.
What is a resilient wedge gate valve?
Gate Valves. One of the most prolific designs in the water industry, the Resilient Wedge Gate Valve incorporates a fully rubber-sealed wedge to prevent the embedding and buildup of sand and sediment, which can lead to seal erosion on metal-seated gate valves.
How much is the McWane family worth?
Brasfield & Gorrie $2.02 billion. McWane $1.6 billion.
Is McWane private?
McWane is also a manufacturer of pressurized cylinders for the storage of propane and other gases through its Manchester Tank and Equipment Company division, and fire protection systems and extinguishers through its Amerex subsidiary….McWane.
| Type | Private |
|---|---|
| Number of employees | 6,000 |
| Website | www.mcwane.com |
How much does a Clow fire hydrant weigh?
44 pounds
Its unrivaled performance includes a pressure rating of 250 psi and a nozzle height that owners can order as required. The Admiral nozzle section body weighs 44 pounds and is built to move water, stopping fire in it tracks. The Clow Admiral carries a 10-year limited warranty on materials and workmanship.
What is NRS gate valve?
NRS gate valve is developed to be used as the cut off and zone control valves in order to substitute supervisory switched butterfly valves and OSY rising stem valves in the fire security systems. These valves are usually burried underground to prevent the risk of freeze.
What is the difference between AWWA C509 and C515?
The AWWA C509 design standard was developed based on the physical characteristics of cast iron while AWWA C515 was developed based on the more robust physical characteristics of ductile iron. AWWA C509 standard was developed in 1980 to formalize the design standard for resilient seat valves for water and waste water.
Where is the McWane factory located?
McWane, Inc. Birmingham, Alabama, U.S. Based in Birmingham, Alabama, McWane is a family owned company employing more than 6,900 team members in over 25 manufacturing locations worldwide.
Which Executive Department brought charges against McWane?
Environmental Violations In 2003, the New Jersey Department of Environmental Protection signed an administrative consent order demanding McWane pay $1 million for air pollution violations at its Atlantic States plant in Phillipsburg, N.J.
Who owns the fire hydrants?
Statutory fire hydrants are owned, installed and maintained by the water companies. Private fire hydrants found on private water mains are not the responsibility of the Local Water Company or the Fire and Rescue Service.
What does 5’1 4 mean on a fire hydrant?
This means dependable and efficient operation when needed. Introduced in 1962, the 5-1/4” American-Darling B−62−B−5 fire hydrant is AWWA rated at 200 psig and seat tested at 400 psig. This hydrant meets or exceeds all requirements of ANSI/AWWA C502 for dry barrel hydrants.
What is the difference between rising and non rising stem gate valve?
Rising stem valves are usually made from cast or forged steel while non rising stem valves are more typically brass, bronze or cast iron. Rising stem gate valves can be used in high pressure rating up to Class 2500 or up to 420 bar, while non rising stem gate valves are normally used for middle pressure rating.
What is AWWA C504?
C504-00: AWWA Standard for Rubber-Seated Butterfly Valves.
What is AWWA C512?
AWWA C512-15 Air Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service.
How many McWane pipe INC facilities were violating OSHA and EPA laws?
Between Jan. 1, 2003 and Nov. 30, 2007, McWane plants across the U.S. have amassed at least 221 OSHA violations with proposed fines totaling $1,063,450. (Proposed fines and citations can be reduced or eliminated on appeal.)
Why choose Clow Valve Company?
For generations, Clow Valve Company has been a global leader in manufacturing waterworks products that are used in water distribution and infrastructure. Our products are integral to the development and function of both plumbing and clean waterworks systems throughout the world.
Is Clow Valve part of McWane?
Clow Valve is proud to be a part of the McWane family of companies. For in-depth information, including instructions, images and sizing charts, please see the Clow Valve submittal sheets section.
When did the Clow company start making fire hydrants?
In 1890, Clow added fire hydrants and waterworks valves to its line by becoming a distributor for the Eddy Valve Company of Waterford, N.Y. In the 1940s, Clow purchased the Eddy Valve Company and the Iowa Valve Company of Oskaloosa, Iowa.
When did Clow become a national company?
In the 1940s, Clow purchased the Eddy Valve Company and the Iowa Valve Company of Oskaloosa, Iowa. The combination of these two companies enabled Clow to become national in scope, making further expansion possible.