What does E62 mean on a Logik washing machine?
E62 not listed but will probably be a motor related problem and no doubt, at a guess, it`ll be the motor brushes worn out which typically will not be available as a separate spare part.
How do I fix the error code on my LG washer?
An error code on the display of the washer can usually be resolved by performing a few simple troubleshooting steps….To fix this:
- Unplug the washer for 10 seconds.
- Plug the washer back in, and press power button.
- Once the washer is drained, restart the washing cycle process.
What are the codes on a LG washer?
Select LG error code on your display:
- FE – Water Overflow Error.
- OE – Drains Slowly.
- IE – Inlet Water Supply.
- UE or UB – Unbalanced Load.
- CL – Child Safety Lock.
- LE – Locked Drive Motor.
- tCL – Tub Clean Cycle.
- dE – Door is Open.
What is the pressure switch on a washing machine?
The pressure switch on a washing machine can be found at the top of the machine, and it identifies how much water is in the machine – telling the control board if the machine has been filled or emptied.
Is there a reset button on my LG washer?
A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed.
How do I put my LG washer in diagnostic mode?
Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer.
How do I reset my LG automatic washing machine?
A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed. If Still Issue not resolve ..