How do I use X-Arcade with Mame?

Posted on by David Darling

How do I use X-Arcade with Mame?

MAME™ Operation:

  1. Switch to Mode1: Move the switch on the back of the X-Arcade™ to the position closest to the serial port.
  2. After you start up a game, use the left pinball flipper button on the left side of the X-Arcade™ (closest to you) to insert coins, and press the white start button(s) to play.

How do I set up X-Arcade?

Plug the X-Arcade™’s included Computer Cable into any USB port on your PC/Mac™. (Tankstick only) Plug the X-Arcade’s™ Trackball Cable into any USB port on your PC/Mac™. You can connect any other PS/2 or USB mouse/keyboard into the PC as well. Test Your X-Arcade™ is working with the X-Arcade™ Test Program.

How do you add games to X-Arcade?

Pick the control you wish to change (Player 1 up, or Player 1 Button 1), then press enter on your keyboard, then press the joystick or button on X-Arcade. It’s that simple. You can change for each game or globally.

How do I use my Xbox controller on Mame?

How to Use USB Controller on a Mame Emulator

  1. Connect the USB controller to the computer running the MAME emulator.
  2. Open the “C:” drive from the “My Computer” screen, then open the “Users” folder.
  3. Open the “.
  4. Start the MAME emulator, then start one of your MAME games using the emulator.

How do you set up a HyperSpin joystick?

Integrating with HyperLaunch and HyperSpin

  1. Go to the “Global” System.
  2. Select “Third Party” tab.
  3. Scroll down to the “KeyMapper” section.
  4. Hit the magnifying glass under the “JoyToKey” Path and navigate to your JoyToKey .exe file.
  5. Frontend Profile Name enter “HyperSpin” without the quotes.

How do I import games to MAME?

You do not need to extract them. Leave them zipped and place them in the “C:\mame\roms” folder. Bring up a DOS command prompt….Now the game rom should run.

  1. To insert a quarter, press 5.
  2. For 1 player, press 1. For 2 players, press 2.
  3. P pauses the rom.
  4. You can press Tab to access the options in MAME.

What are the controls for MAME emulator?

MAME User Interface Controls

  • Up – select previous parameter to modify.
  • Down – select next parameter to modify.
  • Left – decrease the value of the selected parameter.
  • Right – increase the value of the selected parameter.
  • Enter – reset parameter value to its default.
  • Control+Left – decrease the value by 10x.

How do I reset my MAME to default settings?

If you look in your MAME folders, there is a folder called ini. In there just look for the name of the games rom and delete it. That should put the dipswitches back to default.

How do you install a Ultimarc trackball?

Drill 4 “blind” pilot holes through the mounting holes. Then remove trackball and enlarge holes to 1/4 in (6mm). Tap the expanding inserts into place. Install trackball and screw into place.