How do you configure IP address in Solaris 10?

Posted on by David Darling

How do you configure IP address in Solaris 10?

For Solaris 10 11/06 and earlier releases only, modify the IP address in the /etc/inet/ipnodes file or equivalent ipnodes database. The first entry should contain the IP address of the primary network interface and the host name of the system. You can optionally add nicknames for the host name.

How do I change my IP address in Solaris?

To change an IP address on a Solaris system immediately, use the `ifconfig` command. If the user does not know his/her network interface names, he/she should use the `ifconfig -a` command to list all of the available network interfaces.

How do I plumb an IP address in Solaris 11?

Configuring the IP address

  1. Step 1 : Set the NCP. We would set the NCP to DefaultFixed profile in order to configure the IP address manually.
  2. Step 2 : Check the link status. The command “dladm show-dev” does not work in Solaris 11.
  3. Step 3 : Create a new interface.
  4. Step 4 : Creating IP address.

How do I change the gateway in Solaris 11?

  1. Step 1: edit /etc/defaultrouter. Using the editor of your choice, edit the file /etc/defaultrouter — the only line in the file should be the default route of the system, for example: 192.168.
  2. Step 2: Delete the current default route.
  3. Step 3: Assign the current default route.

How do I create a plumb interface in Solaris 10?

(Optional) To make the interface configuration persist across reboots, perform the following steps:

  1. Create an /etc/hostname.
  2. Edit the /etc/hostname.
  3. Add entries for the new interfaces into the /etc/inet/hosts file.
  4. Perform a reconfiguration boot.
  5. Verify that the interface you created in the /etc/hostname.

How do I change my host IP address?

I. Change HostName From Command Line

  1. Use hostname command to Change Hostname.
  2. Modify the /etc/hosts file.
  3. Modify the /etc/sysconfig/network file.
  4. Restart the Network.
  5. Change ip-address Temporarily Using ifconfig.
  6. Change ip-address Permanently.
  7. Modify /etc/hosts file.
  8. Restart the Network.

How can I change my IP address name?

How to change your local IP address in Windows

  1. You can change your local IP address in Settings.
  2. Select your network to change the IP address.
  3. Change the IP setting from automatic to manual.
  4. Open the network settings in System Preferences.
  5. After selecting your network, go to the Advanced settings.

How do I set a default route in Solaris 11?

The following list shows how you use the route command to manage routes:

  1. Use the –p option to add a persistent route: $ route -p add default ip-address.
  2. Use the –name option to add a persistent route by specifying a name rather than destination and gateway: $ route -p add destination-address gateway-address -name name.

How do I find the default gateway in Solaris 10?

Check the file /etc/hostname. bge0 , the configured IP address could be in there. By default the hostname is listed in that file and the name is looked up in /etc/inet/hosts . From the found entry, the IP address is used together with the corresponding netmask from /etc/inet/netmasks .

How do I find the routing table in Solaris 10?

You need to use the netstat command to display the IP routing table under Solaris UNIX operating systems.

How do I create a permanent route in Solaris 10?

Creating Persistent (Static) Routes

  1. Use the –p option to add a persistent route: $ route -p add default ip-address.
  2. Use the –name option to add a persistent route by specifying a name rather than destination and gateway: $ route -p add destination-address gateway-address -name name.

How do I find my default gateway in Unix?

When Command Prompt is open, type the following command: ipconfig | findstr /i “Gateway” (You can copy & paste it in the command prompt; just right-click anywhere in the command prompt window and select Paste.) In this example, your default gateway (router) IP address is 192.168. 1.1.

How do I change the gateway in Solaris 10?

How to Change The Default Route or Gateway on Solaris

  1. Edit /etc/defaultrouter. -This configuration will apply after next reboot. [root@SolarisServer ~]# vi /etc/defaultrouter 192.168.2.1.
  2. Run the following command to delete and add the default route. -This will apply the configuration with immediate effect.