How do I connect my LS9 to my computer?
Connect the computer to the LS9 by using an Ethernet cable via a network switch. When you connect the computer to the LS9 directly, you can use either a crossover or straight cable.
How do I connect my router to my digital mixer?
For a wired connection, just connect a computer’s Ethernet port to the router with an Ethernet cable….
- Click the Network icon on the toolbar, and click the Wi-Fi icon to turn Wi-Fi on.
- Click the Wi-Fi network to connect to, and click Connect.
- Enter the Wi-Fi password, and then click Next to connect.
How do you reset a Yamaha ls9?
By pressing both HIGH and LOW key on the SELECTED CHANNEL section simultaneously, you can reset all the EQ bands of the currently selected channel to 0dB.
How do you turn on a Yamaha sound board?
(1) Turn on the STEREO (master) channel switch. (2) Raise the STEREO (master) fader to “0”. (3) Turn on the ON switch for channel 1. (4) Turn the GAIN knob to adjust the volume up to the appropriate amount, until the SIG (signal) lamp next to the fader lights up.
How do I connect my XR18 to my tablet?
Overview:
- Slide the switch on the front of the XR18 to Access point.
- On the iPad, go to settings > Wi-Fi and select the XR18 network. The name will start with “XR18”.
- Launch the X Air app and tap the XR18 icon that shows up to the left of the “IP” box.
How do you set up a digital router?
Connect to Wi-Fi network
- Place the wireless router with at least 5 feet of distance from any other 2.4GHz devices or metallic or hard reflective surfaces.
- Connect the Wi-Fi router’s power adapter and position the Wireless antenna in a V position.
- Allow it 60-90 seconds for the default Wi-Fi network to become visible.
How do you initialize a Yamaha ls9?
To initialize the console, turn on the power while press and holding the SCENE MEMORY key located on the DISPLAY ACCESS section. The console will start with the startup menu screen. In the startup menu, you can also select a different menu option, such as fader calibration, etc. 8.