What is cabinet scribe molding?

Table of Contents

Scribe Molding is a thin piece of finished trim for cabinets that is designed to cover gaps, inconsistencies, or raw edges that are visible where the cabinet meets the ceiling or wall.

What kind of trim goes on cabinets?

What is the trim on top of cabinets called? There are several types of trim available for the top of kitchen cabinets. Crown molding and dentil molding are two of the most popular and can stand alone. To help connect your cabinets to the ceiling, you can also add rise molding beneath your crown molding.

What is toe kick molding?

Toe kick molding is a long strip of flat covering that is positioned in the unfinished recess to provide a continuous finished look to the cabinetry. Cabinets.com offers toe kick molding in 96″ lengths that are cut in the field to the size needed for installation on the cabinetry.

How to create a corner cabinet?

Create a plan that includes the dimensions of the corner cabinet, the type of wood that you will use and what tools you will need to complete the project. The dimensions of the two side pieces should be: 84 inches (213.36 cm) high by 22 inches (55.88 cm) wide and 84 inches (213.36 cm) high by 21.25 inches (53.98 cm) wide.

How to fix cabinet molding?

Pry the Molding Loose

Place the tip of a screwdriver at any joint or mitered edge of the base molding.

Remove the Molding

Insert the tip of a flat crowbar behind the molding.

Remove Nails,Glue and Splinters

Pull out all the nails remaining in the toe-kick with diagonal pliers.

Cut a Reverse Miter on the New Base

How to remove old corner molding?

Nippers

Pry bar

Putty knife

Utility knife

How to install cove moulding on cabinets?

Carefully remove existing molding using hammer and flat pry bar.

Hold two short 1x4s flat against ceiling,overlapping at cabinet corner.

Mark a line where the overlapping boards meet at outside corner.

Use a combination square to draw a line across one board connecting the inside and outside corners.