How high does a genie 2032 go?
26 ft 1 in
Available with Genie® AC E-Drive or hydraulic drive configuration….Overview.
| Specification | Value |
|---|---|
| Max Working Height | 26 ft 1 in | 8.13 m |
| Platform Capacity | 800 lb | 363 kg |
| Machine Width and Length | 2 ft 8 in | 0.81 m |
What does LL mean on a scissor lift?
LL Machine Tilted Beyond Safe Limits Fault All Models Check to see if machine is tilted, then check wiring to tilt sensor and the tilt sensor. CH NOT A FAULT CODE All Models Indicates that key switch is in base controls.
How much does a Genie GS 1930 scissor lift weight?
3,209 lb
Overview
| Specification | Value |
|---|---|
| Platform Capacity | 500 lb | 227 kg |
| Machine Width | 2 ft 6 in | 0.76 m |
| Machine Length | 6 ft | 1.83 m |
| Weight | 3,209 lb | 1,456 kg |
How many hours will a scissor lift last?
A scissor lift will only count the hours as it is in motion, so if you are hanging drywall or doing electrical, it’s not counting those hours. So, we would say that a scissor lift can last about 500 to 1,000 hours of movement.
How much does a Genie GS 2032 weigh?
1,825kg
Specifications
| Max. Working Height | 8.10m |
|---|---|
| Weight | 1,825kg |
| Travel Width | 0.81m |
| Lifting Mechanism | Scissor Lift |
| Chassis Type | Electric Self propelled |
What does code 36 mean on a scissor lift?
Low Voltage Fault
All Models. Check wiring to angle sensor (operating range 1.9- 3.8V), check option code. 36. Low Voltage Fault.
How can I speed up my genie lift?
Insert 5/32 Allen wrench into adjustment set screw of flow valve and rotate counterclockwise 1/2 turn. Re-check platform function for increased speed or movement. If movement or speed has increased set the platform speed by turning set screw CW or CCW to specified times.
What is the smallest scissor lift available?
What is the Smallest Scissor Lift?
- Genie GS1330M or Genie Runabout. If you are looking for a small scissor lift for indoor reach, the Genie GS1330M is the smallest you can get, but unfortunately, they are not very common in the United States.
- Genie Runabouts for Sale.
- Learn More About Small Scissor Lifts.
What does a Genie GS 3232 weigh?
5,367 lb
Overview
| Specification | Value |
|---|---|
| Platform Capacity | 500 lb | 227 kg |
| Machine Width | 2 ft 8 in | 0.81 m |
| Machine Length | 8 ft | 2.44 m |
| Weight | 5,367 lb | 2,434 kg |
Can a scissor lift fall over?
Both aerial and scissor lifts are prone to tipping over under the wrong circumstances. This can happen if the load is off-center or if a worker is leaning out of the lift – once the center of gravity is off-kilter, it’s unfortunately not difficult for the entire machine to topple over.
How long do genie lifts last?
With proper care and regular maintenance, a boom lift can last around 30 years.
Do scissor lifts have brakes?
To release the brakes on an HB-1030 and HB-1430 scissor lift, start at the rear of the machine. Reach in and flip the levers down, releasing the brakes. To re-engage the brakes, reach in, flip both levers up, and the brakes are re-engaged.
Can you drive a scissor lift while elevated?
Follow the manufacturer’s instructions for safe movement—this usually rules out moving the lift in an elevated position. Isolate the scissor lift or implement traffic control measures to ensure that other equipment cannot contact the scissor lift.
Where is the serial number on a Genie scissor lift?
The serial plate is located on the control box side above the swing motor. The chassis stamp is located on the swing bearing at either side (L/R and R/F of plate).
How much does a genie 2632 weight?
4,729 lb
The quiet, electrically-powered Genie® GS™-2632 slab scissor lifts are excellent for indoor and outdoor construction, maintenance and installation applications on firm, level surfaces….Overview.
| Specification | Value |
|---|---|
| Machine Length | 8 ft | 2.44 m |
| Weight | 4,729 lb | 2,145 kg |
What kind of hydraulic fluid does a Genie scissor lift take?
What type of hydraulic oil should I use in my scissor or boom lift? In most cases, equipment will operate on ISO-32 or ISO-46 rated hydraulic oil, which is a 10w or 18/20w viscosity hydraulic oil. Use only hydraulic oil and do not try to use ATF or motor oil in a hydraulic system.
Can you get a scissor lift wet?
Wet conditions mean slippery conditions for both the wheels on your scissor lift hire and for the staff working on them. As most access equipment is made primarily from metals such as steel, when these surface materials get wet, there is very little traction for those on board.