How do I reset my Linksys WRT54GL router password?

Posted on by David Darling

How do I reset my Linksys WRT54GL router password?

Reset Button

  1. Press the reset button for 30 seconds.
  2. Open up your Web browser and enter “192.168. 1.1” in the address bar.
  3. For the login, leave a blank ID and enter “admin” as the password.

What is Linksys default admin password?

admin
The router password is an administrator password used when accessing the router’s web-based setup page. The default router password for all Linksys Smart Wi-Fi Routers is admin.

How do I access my Linksys WRT54GL?

Access the WRT54GL router through a web browser at the default IP address: http://192.168.1.1. Since the password has been reset, enter admin to log in. Don’t forget to change the router password now that it’s back at the default, which isn’t secure at all.

How do I access WRT54GL?

Type 192.168. 1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Linksys WRT54GL is (blank).

How do I setup my Linksys WRT54G router?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I setup my Linksys Wireless G broadband wrt54gl?

Begin setup of your Linksys Wireless Router by first plugging in the power. Give it 10 seconds or so to initialize and then plug an ethernet cable into your wall jack and into the port on the back of the router marked Internet.

What is the default Wi-Fi password?

#2) Generally, for most of the routers, the default username and password is “admin” and “admin”.

How do I log into my Linksys WRT54G?

Type 192.168. 1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Linksys WRT54G is (blank).

How do I connect my Linksys wrt54gl?

How to hard reset Linksys WRT54GL?

Linksys WRT54G Reset Button Location. To reset your router, use the following steps: Press the reset button for 30 seconds. The settings should now be returned to the factory default settings, meaning any changes you had made would be deleted. Open up your Web browser and enter “192.168.1.1” in the address bar.

How to configure Linksys WRT54G wireless router?

Log In Visit the Web address 192.168.1.1 in any Web browser on a computer connected to the router.

  • Open Wireless Settings Image Credit: Image courtesy of Linksys Open the Wireless tab in the router’s setup interface.
  • Name the Network Image Credit: Image courtesy of Linksys Pick a name — SSID — for your wireless network.
  • Set Up Security

    • How to secure your Linksys router WRT54G?

    Open any web browser (Internet Explorer or Safari). Enter your router’s IP address in the Address bar,then press[Enter].

  • Enter “admin” in the Password field then leave the User name blank.
  • Click on the Administration tab > Firmware Upgrade sub-tab.

    • How to set a password on a Linksys router?

    Turn on the router. Most Linksys routers don’t have an on/off switch,but turn on automatically when you plug it into an outlet.

  • Reset the router. Wait until the Power light is blinking and then press and hold the Reset button for 10 seconds.
  • Turn off the router and turn it on again.
  • Wait for the Power light to stop blinking.