What are the different views of a drawing?
Types of Drawing Views
- Base View. The first view created in a drawing.
- Projected View. An orthographic or isometric view that is generated from a base view or other existing view.
- Auxiliary View. A view projected perpendicular to a user-selected line or edge.
- Section View.
- Detail View.
- Overlay View.
- Draft View.
What are the 3 views in a working drawing?
process. As a rule, they show an object from three different views (Usually the Front, Top, & Right Side). Each of the views are drawn in 2-D (two dimensional) , and have dimensions labeling the length, width, and height of the object.
What are the 3 main views?
An orthographic projection consists of three views: the front view, the top view, and a side view.
How many views are used for orthographic drawings?
three views
Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view. Other names for these views include plan, elevation and section.
What are views and different types of views?
System Defined Views will be automatically attached to all User Defined databases. And these provide information about the database, tables, and all the properties of the database and tables. There are three types of System defined views, Information Schema, Catalog View, and Dynamic Management View.
What is orthographic view and isometric view?
Isometric: a method of representing three-dimensional objects on a flat surface by means of a drawing that shows three planes of the object. Orthographic: a method for representing a three-dimensional object by means of several views from various planes.
How many types of views are there?
There are three types of pictorial views: perspective. isometric. oblique.
What is a sectional view?
A sectional view represents the part of an object remaining after a portion is assumed to have been cut and removed. The exposed cut surface is then indicated by section lines. Hidden features behind the cutting plane are omitted, unless required for dimensioning or for definition of the part.