What nails work with Dewalt DCN660?
The DEWALT DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4″ to 2-1/2″ which makes it ideal for fastening crown molding, casing, and baseboards.
Can you use Tacwise nails in Dewalt nail gun?
Product description Tacwise 16G angled nails (thicker gauge than 18G/180 nails). for use in DEWALT and PASLODE tools with angled magazines.
What angle are Dewalt finish nails?
20-degree angle
These are set at a 20-degree angle so as long as your tool operates at a 20-degree angle, these nails will work for you because they are the same length and gauge as you are already using.
What nails do I need for DCN660?
DeWalt DNBA1638GZ 16 Gauge 38mm 2nd Fix Galvanised Angled Brad Nails 2500 Pcs. These DeWalt galvanised finishing nails are designed especially for DeWalt’s 16 gauge nailer, the DCN660, to ensure fewer jamming and fitment issues.
What nails does the DeWalt nail gun take?
DeWalt DCN692 Features It’s capable of accepting either clipped head or offset full round head paper tape nails collated at 30 – 34 degrees. The range of lengths is from 2″ to 3-1/2″ and 0.113″ to 0.131″ diameters.
What nails can I use in my DeWalt nail gun?
What nails do you use for nail gun?
18-gauge nails are used in a brad nail gun, whereas 16-gauge or 15-gauge nails are used in a standard finish nailer. Finishing nailers can handle bigger nails, but as with brad nails, the head will be small and the hole created will be easy to fill.
Can you use straight nails in an angled nailer?
When it comes to the finish nailers, usually the 15 gauge nailers are angled and the 16 gauge finish nailers have straight magazines. The nails used in these tools are not interchangeable.
Will paslode angled finish nails work in DeWalt?
A: Yes, these finish nails will work in the Dewalt 16-Gauge 20-degree nailer. They’re also tested extensively in Paslode’s 16-Gauge Angled Nailer, which is the lightest and most compact available, and comes with a “no questions asked” 2-year Service Promise.
What nails will fit a DeWalt nail gun?
What nails does a DeWalt first fix nail gun take?
1040 x 90mm Galvanised Ring Framing Nails for DEWALT Cordless First Fix (2 x Handy Pack 520pcs)
Can you use any nails in a nail gun?
Regular nails are also a bit larger in diameter than nails made to be shot from a nail gun. The holes made by regular nails are usually a bit larger as well. This can impact the final appearance of the wood that is nailed together.
Can you use different size nails in a nail gun?
Different types of nail guns can be used with different nail lengths. A typical brad nailer, for example, shoots nails that are 3/8 inch to 1 1/4 inches in length, while a larger framing nailer typically shoots nails from 2 to 3 1/2 inches in length.
What’s the difference between straight and angled nail guns?
The difference between a straight and angled nailer is the shape of the nail magazines. A straight nailer has a magazine that is parallel to the surface you are nailing. With an angled nailer, the magazine comes up at an angle from the head of the nailer.